Technical data
Table Of Contents
- Chapter 1 Important information
- Chapter 2 Introduction
- Chapter 3 Using your camera
- 3.1 Parts supplied
- 3.2 Camera features and controls
- 3.3 Charging the camera
- 3.4 Switching on and off
- 3.5 Power management
- 3.6 Battery status indicator
- 3.7 Adjusting the display brightness
- 3.8 Changing the display mode
- 3.9 Zooming the display (TH32 model only)
- 3.10 Freezing the display (TH24 model only)
- 3.11 Adjusting the eyepiece diopter setting
- Chapter 4 Troubleshooting and support
- Chapter 5 Technical specification
- Chapter 6 Options and accessories
3.5Powermanagement
Yourcameraisequippedwithapowermanagementsystemthat
providesupto5hoursofcontinuousoperation.
Whenswitchedoff,thebatterywillholdachargeforupto2months.
Ifnobuttonsarepressedforapproximately5minutes,thecamera
willswitchoffautomatically.Thispreventsthebatteryfromdraining
ifyouinadvertentlyleavethecameraswitchedon.
Whenauto-shutdownbegins,Autoshutdown30sisshowninthe
display.Aftercountingdownfor30seconds,thecamerawillswitch
off.
Tostoptheauto-shutdownprocessonceithasbegun,pressany
button.(Thenormalfunctionofthebuttonwillnotoccur.)
3.6Batterystatusindicator
Yourcameraisequippedwithasophisticatedpowersystem,using
arechargeableinternalLi-Ionbattery.
Whilethecameraisswitchedon,abatterystatusindicatorisshown
inthecornerofthedisplay.Thisindicatorprovidesanestimate
oftheremainingbatterycharge:
DisplayiconBatterystatus
Fullcharge
Halfcharge
Charging
16TH24/TH32handheldthermalcameras–Userreference