Technical data
Table Of Contents
- Chapter 1 Important information
- Chapter 2 Introduction
- Chapter 3 Using your camera
- 3.1 Parts supplied
- 3.2 Camera features and controls
- 3.3 Charging the camera
- 3.4 Switching on and off
- 3.5 Power management
- 3.6 Battery status indicator
- 3.7 Adjusting the display brightness
- 3.8 Changing the display mode
- 3.9 Zooming the display (TH32 model only)
- 3.10 Freezing the display (TH24 model only)
- 3.11 Adjusting the eyepiece diopter setting
- Chapter 4 Troubleshooting and support
- Chapter 5 Technical specification
- Chapter 6 Options and accessories
3.3Chargingthecamera
Youmustfullychargethecamera'sinternalLi-Ionbatterybefore
usingthecameraforthersttime.
Tochargethecamera:
1.LiftthecoverontheUSBsocket,andplugintheUSBcable
providedwiththecamera.
2.PlugtheotherendofthecableintoaUSBpowersource.
Whenchargingcorrectly,thechargingindicatorislityellow.
Whenfullycharged,thechargingindicatorislitgreen.Theinitial
chargetimeisapproximately4hours.
3.4Switchingonandoff
Ensurethatthecamera'sinternalbatteryischarged.
Toswitchthecameraonandoff:
1.Withthecameraswitchedoff,pressthePowerbutton.
Anaudiblealertsounds,thedisplayturnson,andthecamera
buttonsareback-lit.Thecameraisreadytouseinapproximately
4seconds.
2.Withthecameraswitchedon,pressthePowerbutton.
Anaudiblealertsounds,thedisplayturnsoff,andthecamera
buttonsgodark.
IfyoupresstheDisplayBrightnessbutton,theLEDtasklight
turnson.
Note:TheLEDtasklightisdisabledwhilethecameraisswitched
on.
Usingyourcamera
15