Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company.
ST80 Navigator Keypad Operation Manual 1 abc 4 jkl 7 rst 2 def 3 ghi 5 mn 6 opq 8 uvw 9 xyz ins 0 del nav iga tor
Navigator
ST80 Navigator Keypad Operation Manual Package Contents 1. Navigator keypad 2. Thumb nuts (2) 3. Threaded fixing studs (2) 4. White sun cover 5. SeaTalk cable 6. Installation template 7. Operation manual 8. Warranty card 9. Operation cue card 10.
2 ST80 Navigator Keypad Operation Manual Contents Chapter 1: Introduction .............................................................. 3 Introduction ....................................................................... 3 Chapter 2: Operation ................................................................. 4 2.1 Basic Operation ............................................................ 4 2.2 General Operating Information ......................................
3 ST80 Navigator Keypad Operation Manual Chapter 1: Introduction Introduction The Navigator is an extension of the ST80 Masterview keypad. The unit consists of a multidirectional cursor control pad and twelve keys dedicated to alphanumeric data entry, insert and delete. These dedicated keys greatly increase the speed at which common navigational tasks, such as waypoint creation using Lat/Lon, ranges and bearings, can be accomplished.
4 ST80 Navigator Keypad Operation Manual Chapter 2: Operation 2.1Basic Operation The Navigator allows you to quickly enter or edit navigational data displayed on a Masterview display head, using the alphanumeric, insert, delete and trackpad keys. 1 abc 2 def 3 ghi 4 jkl 5 mn 6 opq 7 rst 8 uvw 9 xyz ins 0 del 1 abc 2 def 3 ghi 4 jkl 5 mn 6 opq 7 rst 8 uvw 9 xyz Use these keys to enter alphanumeric data at the current cursor position (e.g. cycle of key 1 is 1, a, b, c, 1 etc.
5 ST80 Navigator Keypad Operation Manual For users with more than one Masterview, the Navigator can be configured so that it is dedicated to just one Masterview – this is referred to as linking. masterview SINGLE WP 020o23.82 N 052o04.02 E 1 abc 2 def 3 ghi 4 jkl 5 mn 6 opq 7 rst 8 uvw 9 xyz ins 0 del navigator 1 abc 2 def 3 ghi 4 jkl 5 mn 6 opq 7 rst 8 uvw 9 xyz ins 0 del masterview SINGLE WP 020o23.82 N 052o04.
6 ST80 Navigator Keypad Operation Manual Chapter 3: Problem Solving & Maintenance 3.1 Problem Solving Keypad does not operate - power LED not illuminated • Make sure the cable connecting the keypad to SeaTalk is connected properly. • Make sure the cable is not damaged. Replace the cable if it is damaged. Navigator operates all Masterview display heads • Display heads and keypad are not linked. Please refer to the Masterview manual for linking details.
ST80 Navigator Keypad Operation Manual 7 Chapter 4: EMC & Servicing Guidelines 4.1 Important information All Autohelm equipment and accessories are designed to the best industry standards for use in the leisure marine environment. Their design and manufacture conforms to the appropriate Electromagnetic Compatibility (EMC) standards, but good installation is required to ensure that performance is not compromised.
8 ST80 Navigator Keypad Operation Manual 4.3 Check Before Going to Sea • Always check the installation before going to sea to make sure that it is not affected by radio transmissions, engine starting etc.. • In some installations, it may not be possible to prevent the equipment from being affected by external influences. In general this will not damage the equipment but can lead to it resetting, or momentarily may result in faulty operation. 4.
9 ST80 Navigator Keypad Operation Manual Chapter 5: Specification Dimensions: 110 x 68 x 17mm (4.33 x 2.67 x 0.
10 ST80 Navigator Keypad Operation Manual 81041-1
Navigator
Raytheon Marine Europe Ltd. Anchorage Park, Portsmouth, P03 5TD, England.
