Specifications

20 ST60+ Tridata Instrument Owner’s Handbook
2. Using both thumbs, gently press an upper corner of the instrument from the
bezel, then remove the bezel from the instrument. Retain the rubber keypad
which is released when the bezel is removed.
3. Referring to the Fitting the flush mount bezel illustration, insert the panel
seal (8) in the corresponding recess on the back of the flush mount bezel (7).
D8148-1
Fitting the flush mount bezel
87 9 10 11 12
D8149-1
81263_2.book Page 20 Monday, December 5, 2005 9:08 AM