Product specifications

Chapter 3: Installation
13
57 mm
(2.25 in)
D4643-3
4 mm
(
5
/
32
inch)
2.5 mm
(
1
/
10
inch)
Note: If you intend fitting a nonstandard transducer, extra tools may
be required
Site requirements
Rotavecta wind transducer
The Rotavecta wind transducer can be either mounted on a flat surface
or clamped to a horizontal rail. Suitable rail diameters are from 23 mm
(
29
/
32
inch) to 25 mm (1 inch).
The Rotavecta must be fitted:
• As high as possible and away from any equipment which may
shield the transducer or otherwise disturb the air flow.
• In a position which allows reasonable access for installation and
servicing.
Instrument
D4644-2
Instrument dimensions
126 mm (5.0 in)
21 mm
(0.8 in)
17 mm
(0.67 in)
55 mm
(2.2 in)
70 mm
(2.8 in)
30 mm (1.2 in)
minimum cable clearance
ST40
160_3c03 .p65 01/05/01, 16:1513