Operation Manual

32 ST40 Bidata Instrument Owner’s Handbook

INTERMEDIATE CALIBRATION

BIDATA

CAL

ST40

BIDATA

ST40

BIDATA

ST40

Note:

If there is no key activity when

the Software version screen

is displayed, calibration will

time out to normal operation

after 5 seconds,

Software

version

D4745-2

for approximately 4 secondshold down and

Depth

status

To save your settings and return to normal operation from any screen,

Speed

status

During normal operation

for approximately 2 secondsand

hold down

4.4 Dealer calibration

Dealer calibration enables you to set:

• User calibration on/off.

• Boat show mode on/off.

Dealer calibration also gives access to the Factory defaults screen.

This enables you to reapply the factory settings if you want to reset the

instrument to a known operating condition.

Follow the procedure in the Dealer calibration flow diagram.

159_2c04.p65 01/05/01, 15:1532