Specifications

8-2-24 Section 8: Autopilots
ST290 Instrument System Owner’s Handbook
If necessary, you can make a temporary change to rudder gain as
follows:
1. Press the
RESP button for 1secondto display the rudder gain
(RUDDER GAIN) screen:
2. Press
-1 or +1 to change the rudder gain.
3. Press
DISP or wait for 10 seconds to return to the previous display.
Figure 2-21: Adjusting Rudder Gain
Note: You will lose these temporary changes to rudder gain whenever
the system is powered off. You can make PERMANENT adjustments in
Pilot Basic or Advanced Calibration (see Section 8, Chapter 5).
SECOND
1
2
3
4
5
6
7
8
9
Screen will "pop-up"
in front of current view
Decrease
rudder gain
Increase
rudder gain
D6041-1
81183_2 S8.book Page 24 Tuesday, May 6, 2003 9:08 AM