Product specifications

Chapter 2: Getting Started & Adjusting the Display 2-17

Offsetting the Center

3. Press the required zoom option soft key, INTO WIN or FROM WIN.

The soft keys are cleared, and the cursor has control of the zoom box that

indicates the area to be enlarged. This is indicated by the letters ZMB in

inverse video, and the four-headed cursor symbol. The zoom box defaults

to its last-used position since power-on.

4. Use the trackpad to move the zoom box to the required area, then press

ENTER. The selected area is shown in enlarged format, either in the quar-

ter-screen Zoom window (INTO WIN) or in the main window (FROM WIN).

Press DISPLAY then ENTER to exit the Zoom mode.

Alternatively, you can press and hold DISPLAY for 2 seconds.

➤ You can use the context sensitive cursor to select and move the enlarged area

in view in the window (the label ZMB is displayed). See Moving and deleting

items with the context-sensitive cursor on page 1-17

Figure 2-8: Radar Display Zoom Window

Offsetting the Center

The radar picture is normally shown with your vessel at the center of the

display. However, you can move the center, so that your vessel is offset by up

to 66% of the radius, anywhere on the screen.

Note: You cannot offset the center when the radar display is set to the longest

range scale.

ZMB

D3972-2

Zoom Box, indicating the

enlarged area. You can move this

using the context-sensitive cursor,

to change the image in the Zoom

Window

Zoom Box cursor text

Zoom Window, providing a

times 2 enlargement of the area

shown in the Zoom Box

AUTO

3nm

RINGS

1/2

H-UP

126°T

RADAR ZOOM ( x2 )

CURSOR

BRG

033° R

RNG

1.78nm

ZMB

RM RV3