Product specifications

Chapter 7: Setting Up the System Defaults 7-1

Introduction

Chapter 7: Setting Up the System Defaults

7.1 Introduction

Once you have installed your display unit and are familiar with its basic

operation (describedin Chapter 1 and Chapter 2),youneedtosetitupsothat

itobtainsthecorrectinformationfromtheequipmentyouhaveconnecteditto,

operates according to your requirements, and displays information according

to your preferences.

This is achieved using the soft key controls that are displayed when you press

the MENU key.

In most cases, you will only need to use the MENU key optionswhen you first

set up your system. However, you may decide to change the way you have

customized some aspects, such as the screen and help setting, as you become

more familiar with your system.

Onceyouhaveset thevalues,theyremainasthedefaultsettings untilyoureset

them; they are retained even if you power off your display.

This chapter covers the following topics:

• Changing the default set up parameters

• System parameter functions and default settings

• Radar-specific parameter functions and default settings

• MARPA specific parameters and default settings

• Advanced Radar functions

• Chart specific parameter functions and default settings

You should check the functions of the parameters, and decide on the new

settings, before making the changes.

Note: The SYSTEM SET UP menu option from the chartplotter display is the

same as that accessed from the radar display SYSTEM SET UP menu.