User`s manual

Interfacing RNS 29
RayTech SeaTalk interface
The RayTech SeaTalk interface converts the SeaTalk data format into RS-232 signals
and vice-versa. When configuring your instrument connections within RNS, the COM
port to which SeaTalk is connected must be set to:
Raymarine SeaTalk Interface . The
connections are:
Mounting the interface box
To mount your SeaTalk interface box, select a suitable location that is:
• away from direct contact with water.
• clean and grease-free.
• easily accessible for cabling.
• reasonably well protected from physical damage.
Yellow
Black
Black
Green
Red(v+)
Screen(0v)
Yellow(Data)
RayTech RNS
RayTech SeaTalk Interface
Part No.E85004
Cable to
SeaTalk System
9 - pin cable
Part No. E86001
D6976_1
+
_
+
_
RS-232 SeaTalk NMEA
+
_
+
_
NMEA SeaTalk RS-232