Specifications

Ray 240 programming procedure 9
6. Re-connect the power cable to the base unit and switch ON.
7. In the C:\PEMICRO folder, double-click the 49129XYY.LNK shortcut icon. The
programming of the base unit now starts. The software will automatically
close on completion.
8. Switch off and remove the power cable from the Ray240 base unit.
9. Remove the 6-way cable connection from the base unit PCB.
10. Replace and secure the top cover of the base unit.
11. Re-connect the handsets, interface cables and aerial connection from the
base unit.
12. Re-connect the power cable to the base unit and switch ON.The software
version number is displayed briefly at the bottom right-hand corner of the
handset display.
13. Check that the radio functions correctly.