Specifications

Important information 3
Important information
Introduction
The Ray 240 service programming kit provides the hardware to program a Ray240 base unit.
The PE68HC12BDM software on the supplied CD-ROM is compatible with a PC running any of
the following:
• Windows 98.
• Windows 2000.
•Windows XP.
•Windows ME.
Safety notices
WARNING: Electrical safety
Make sure that the power supply to the Ray240 base unit is
switched off before removing the cover.
WARNING: Product installation
This equipment must be installed and operated in accordance
with the Raymarine instructions provided. Failure to do so could
result in poor product performance, personal injury, and or
damage to the boat.
EMC conformance
All Raymarine equipment and accessories are designed to the best industry
standards for use in he recreational marine environment. Their design and
manufacture conforms to the appropriate Electromagnetic Compatibility (EMC)
standards, but correct installation is required to ensure that performance is not
compromised.
Handbook information
To the best of our knowledge, the information contained in this handbook was
correct as it went to press. However, our policy of continuous product
improvement ad updating may change specifications without prior notice. As a
result unavoidable differences between the product and handbook may occur
from time to time. Raymarine cannot accept any responsibility for any
inaccuracies or omissions it may contain.