RAY215E Modular VHF Radio Owner’s Handbook Document number: R49018_1 Date: February 2002 RAY215_EURO Cover.
RAY215_EURO Cover.
i Purpose This handbook contains very important information on the installation, operation, and maintenance of your new equipment. To get the best results in operation and performance, please take the time to read this handbook thoroughly. RAY215E The RAY215E is a VHF radiotelephone that, when outfitted with the optional full function handset, includes equipment for Class “D” Digital Selective Calling.
ii SAFETY NOTICE This device is only an aid to navigation. Its performance can be affected by many factors including equipment failure or defects, environmental conditions, and improper handling or use. It is the user's responsibility to exercise common prudence and navigational judgement, and this device should not be relied upon as a substitute for such prudence and judgement. Your Raymarine VHF radio generates and radiates radio frequency (RF) electromagnetic energy (EME).
iii Europe Raymarine Ltd Anchorage Park Portsmouth, Hampshire England PO3 5TD Telephone: +44 (0) 23 9269 3611 Fax: +44 (0) 23 9269 4642 © Raymarine, Inc. 2001 RAY215_EURO Preface.
iv Certificate No. RT015 We Raymarine Limited Anchorage Park Portsmouth Hampshire England P03 5TD declare, under our sole responsibility, that the products identified in this declaration, and to which this declaration relates, are in conformity with the essential requirements of European Parliament and Council Directive: 1999/5/EC on radio equipment and telecommunication terminal equipment and the mutual recognition of their conformity.
v Table of Contents Section 1 General Description 1.1 Introduction ......................................................................... 1-1 1.2 Equipment Features ............................................................. 1-1 1.3 Minimum Function Handset / Full Function Handset Options ............................................ 1-2 Section 2 Installation 2.1 Unpacking and Inspection ................................................... 2-1 2.2 Equipment Supplied.....................................
vi 3.5.10 Priority Channel ....................................................3-11 3.5.11 Channel Memory ................................................... 3-11 3.5.12 Resetting Factory Defaults .................................... 3-11 3.5.13 Scan Modes .......................................................... 3-12 3.5.14 Monitor Mode ...................................................... 3-13 3.5.15 Multi-Call Operation ............................................ 3-14 3.5.16 LCD Backlight Function ..
vii 4.7 4.6.17 NMEA Operation ................................................. 4.6.18 Digital Selective Calling (DSC) ........................... 4.6.18.1 Individual Call to Another Ship (Ship-to-Ship) ................................................ 4.6.18.2 Individual Call to Shore Station (Ship-to-Shore) .............................................. 4.6.18.3 Receiving an Individual Call ......................... 4.6.18.4 Transmitting a Group Call ............................. 4.6.18.
viii GLOSSARY OF TERMS All Scan .......................... Scans all channels ATIS ................................ Automatic Transmission Identification System. Used for inland waterways in some European countries. Canadian Channels ......... Channel designator as defined by Industry Canada DSC ................................ Digital Selective Calling Dual Watch ..................... Monitor the Priority Channel (9 or 16) while working on another channel Duplex ............................
1-1 General Description Section 1 1.1 General Description Introduction Congratulations on your purchase of Raymarine's RAY215E marine radiotelephone. This handbook describes the physical and functional characteristics of the radiotelephone. The RAY215E is a microprocessor-controlled, digitally synthesized, compact transceiver that provides reliable simplex and semi-duplex (twofrequency) communications.
1-2 General Description • Intercom operation between Minimum Function Handset and Optional Full Function Handset (second station) • Distant/local mode 1.3 Minimum / Full Function Handset Options The RAY215E can be operated with the standard Minimum Function Handset, an optional Full Function Handset with additional features, or both. Operation with both units installed enables intercom capabilities between the two stations.
2-1 Installation Section 2 2.1 Installation Unpacking and Inspection Use care when unpacking the unit from the shipping carton to prevent damage to the contents. It is also good practice to save the carton and the interior packing material in the event you must return the unit to the factory. 2.
2-2 2.3 Installation Planning the Installation When planning the installation of your RAY215E, the following conditions should be considered to ensure dependable and trouble-free operation. Mount the Base Station Transceiver using the Mounting Template provided. The Base Station Transceiver should be located in the radio telegraph operating room or the room from which the ship is normally navigated.
2-3 Installation Figure 2-1 Typical Mounting Methods 2.3.2 Flush Mounting In addition to the typical Mounting Methods, the RAY215E may also be flush mounted using the optional Flush Mount Kit. These kits are available from your Raymarine dealer or our Customer Service Department. There are two methods of mounting the radio using the flush mount kit: from the front or rear of the console. Choose the method that best suits your console. 1. Select the location for the radio transceiver.
2-4 Installation 8. Continue to push the bracket onto the transceiver until it is flush with the front bezel. 9. On each side of the transceiver, insert a screw through the bracket tab and into the threaded holes from which you removed the yoke knobs. 10. Tighten the screws. 11. It is recommended to run a bead of RTV or similar sealant around the inside edge of the bracket to avoid water entry behind the console. 12. Insert the radio and attached bracket into the cutout. 13.
2-5 Installation Figure 2-2 Outline and Mounting Dimensions All dimensions are shown in inches and (millimeters) RAY215_EURO Sect2.
2-6 2.4 Installation Electrical Connections 2.4.1 DC Power and External Speaker Connections The 6-foot long power cable is a multi-purpose assembly containing three wire-pairs for connections to DC power, NMEA input, and an optional speaker. Connections to the 6-pin connector are as follows: Wire Color Function Connects to RED Power + Ship's 13.6 VDC power BLACK Power − YELLOW Speaker + External speaker GREEN Speaker − BLUE NMEA + Input from position source (GPS, etc.
2-7 Installation Figure 2-4 Power Cable Length It is recommended that lugs be used to connect the power cable to the DC supply and the lug connections should be both crimped and soldered. This is very important in order to ensure adequate current draw to the equipment. Intermittent operation may result if an insufficient connection is made to the power source. The connection terminal should be clean, with no sign of corrosion. The red (+) wire is connected to the positive terminal of the power source.
2-8 Installation 2.4.3 NMEA Data (Requires Full Function Handset) When an optional Full Function Handset is installed enabling Class D DSC functionality, inputting NMEA data will provide position information to the radio. The RAY215E accepts NMEA 0183 data from a position determining device (GPS, etc.) to provide the Latitude and Longitude position information that is transmitted during a DSC Distress Call.
2-9 Installation If the antenna RF connector is likely to be exposed to the marine environment, a protective coating of grease (Dow Corning DC-4 or similar) can be applied to the connector before connecting it to the radio. Any other extensions or adapters in the cable run should also be protected by silicon grease and then wrapped with a waterproofing tape. 2.4.5 Antenna Mounting Suggestions The best radio in the world is useless without a quality antenna and good location.
2-10 Installation Figure 2-6 Typical Grounding Method RAY215_EURO Sect2.
3-1 Operation with Minimum Function Handset Section 3 3.1 Operation with Minimum Function Handset Introduction The RAY215E can be operated with the standard Minimum Function Handset, or an optional Full Function Handset that enables additional features, or both handsets to enable intercom capabilities. This section describes using the RAY215E with the Minimum Function Handset. See Section 4 for a full discussion of operation using the Full Function Handset. 3.1.
3-2 Operation with Minimum Function Handset Note: The RAY215E is designed to have the base station as the priority unit. You should install the base station and Minimum Function Handset in the radio operation room or the location from which the ship is normally navigated. If an optional second station Full Function Handset is also installed, that handset is the one that should be installed in the remote location. 3.
3-3 Operation with Minimum Function Handset 13 11 4 5 6 1 7 14 12 15 8 9 10 3 2 Figure 3-2 Layout of Controls 3.4 Control and LCD Display 3.4.1 Controls Several of the buttons on the front panel of the base station serve multiple purposes. For the most part, the function indicated on the first line of the button is accessed by pressing and releasing that button. The function indicated on the second line of the button is accessed by pressing and holding the button for two seconds.
3-4 Operation with Minimum Function Handset ! SQUELCH Knob This knob controls the squelch sensitivity level. Rotating the knob clockwise increases the squelch level. Rotating the knob counterclockwise decreases the squelch. The lower bar graph on the LCD displays the squelch level. " SCAN/ MEM Key This key starts or stops All Scan and Memory Scan Modes. The key also places favorite channels into the radio's memory for quick selection.
3-5 Operation with Minimum Function Handset MON/ 1/25 Key Pressing and releasing MON/1/25 initiates the Dual-Watch Monitor mode. $ Pressing and holding MON/1/25 for 2 seconds toggles the output power between 1 and 25 watts. While in the 1 Watt mode, the 1W indicator illuminates on the LCD. Pressing this button while holding PTT overrides the 1W output setting. See the Frequency tables in section 6 for the affected channels.
3-6 Operation with Minimum Function Handset Channel UP Key This key increments the channel number by 1 each time it is pressed. If pressed and held, the channel increments at a rate of 10 channels per second. Channel DOWN Key This key decrements the channel number by 1 each time it is pressed. If pressed and held, the channel decrements at a rate of 10 channels per second.
3-7 Operation with Minimum Function Handset NMEA indicator Appears in every operation mode when valid NMEA data is being received. (Applicable only with Optional Function Handset) DSC indicator Appears when the radio is in the DSC mode, when an optional Full Function Handset is installed enabling the Class D DSC functionality. ! INT indicator Appears when the International frequency group is selected.
3-8 3.5 Operation with Minimum Function Handset ! REMOTE indicator Appears when the optional, remote full functional handset has the priority operation. " Channel display (Large) Displays the current channel number. # Channel display (Small) Displays the Priority Channel number while the radio is in the Monitor mode and function indicators during DSC mode. $ VOL indicator (in bar graph) Represents the current sound volume level.
3-9 Operation with Minimum Function Handset 3.5.5 Setting the Channel To select the appropriate channel, rotate the CH (Channel Select) Knob clockwise/counterclockwise or use the Channel UP/DOWN keys on the Minimum Function Handset. 3.5.6 Selecting the Private Channel Ten Private Channels have been allocated for specific use within certain countries. The following table lists the Private Channel designations in each country and the corresponding RAY215E Private Channel numbers (1–10).
3-10 Operation with Minimum Function Handset To select the Private Channel: 1. Simultaneously press and release the SCAN/MEM and MON/1/25 keys. The assigned private channel number appears in the large channel display. If multiple Private Channels are available, the first channel number appears. “Pc” appears in the small channel display. 2. If multiple Private Channels are available, turn the CH knob until the desired Private Channel number appears. The displayed Private Channel number is selected.
3-11 Operation with Minimum Function Handset 3.5.9 Selecting a Weather Channel Press the MULTI key once to enter the Weather mode and use either the Channel Select (CH) knob or Channel UP/DOWN keys on the Minimum Function Handset to select the desired weather channel. This function is only available when the RAY215E has been upgraded to use the US channel set, and US mode is selected. Weather broadcasts can only be heard in US and Canada. 3.5.
3-12 Operation with Minimum Function Handset To perform the memory reset: 1. Turn the radio OFF. 2. Press and hold the SCAN/MEM key. 3. While continuing to hold the SCAN/MEM key, turn the radio ON. The LCD remains blank for 2 seconds, CL appears momentarily, then the unit switches to channel 16. 3.5.13 Scan Modes The RAY215E is equipped with two types of scan options: All Scan and Memory Scan. How these options are initiated depends upon whether there are any channels stored in memory.
3-13 Operation with Minimum Function Handset 3.5.14 Monitor Mode The RAY215E is equipped with 2 types of monitor operations: Dual Watch and Tri-Watch. Note: Monitor modes are disabled when ATIS operation is active. Dual Watch Mode Dual Watch monitors the selected working channel or Private Channel and Channel 16. To initiate Dual Watch, first select the working or private channel to be monitored, then press the MON/1/25 key once.
3-14 Operation with Minimum Function Handset 3.5.15 Multi-Call Operation The Multi-call function stores as many channels as desired in memory for quick access to frequently used channels. Using Multi-Call To start the Multi-Call operation, press the MULTI key. The last used Multi-Call channel is displayed. Use the UP/DOWN key on the handset or Channel Selection (CH) knob to increment/decrement through the MultiCall channels in memory.
3-15 Operation with Minimum Function Handset 3.5.17 NMEA Operation When an Optional Full Function Handset is installed enabling the Class D DSC functionality, the RAY215E can receive valid position and time information, which are transmitted during a DSC Distress call. This data can be communicated via NMEA 0183 from a GPS, fishfinder, radar, or any device that outputs GPS sentences. If the radio does not detect the position data, it provides alerts urging you to find and correct the fault.
3-16 Operation with Minimum Function Handset However, if no signal is detected, the NMEA indicator flashes and a 5second-long staccato alert tone is emitted. The NMEA indicator continues to flash until valid positional data is received. If valid positional data (from the same source) is later restored, the NMEA indicator is again displayed solid.
3-17 Operation with Minimum Function Handset Individual, All Ships and Group DSC calls come in three varieties: ROUTINE for normal calls, SAFETY for advisory alerts, and URGENCY for assistance when life is not in immediate danger. To enable DSC mode, press and release the DSC/PRI and D/L / I.C. keys simultaneously. The DSC indicator illuminates and a tone sounds.
3-18 Operation with Minimum Function Handset 4. Press the DSC/PRI key once to accept. The small character display now shows a "2", designating the second digit in your MMSI number. 5. Rotate the Channel Select (CH) knob until the second digit of your MMSI number appears in the large channel display. 6. Press the DSC/PRI key once to accept. 7. Enter all 9 digits of the MMSI number in the same way.
3-19 Operation with Minimum Function Handset 3.5.18.2 Individual Ship's Call An Individual Ship's Call is a DSC call made to a specific ship identified by its MMSI number. There are three types: ROUTINE for normal calls, SAFETY for advisory alerts, and URGENCY for assistance when life is not in immediate danger. The RAY215E can receive all three types of Individual calls but can only transmit ROUTINE Individual calls. As with any DSC operation, the call is made on channel 70.
3-20 Operation with Minimum Function Handset 5. Rotate the Channel Select (CH) knob until the second digit of other ship’s MMSI number appears in the large channel display. 6. Press the DSC/PRI key once to accept. 7. Enter all 9 digits of the MMSI number in the same way. 8. Once the 9th digit has been entered and accepted, the RAY215E plays back the 9 digits to verify the entry. If the number is incorrect, press the DSC/PRI key once and release.
3-21 Operation with Minimum Function Handset 10. After you have selected the other ship's MMSI number, the radio prompts you for the working channel you wish to communicate on. The large character display shows the last used channel number and a "W" appears in the small channel display. Use the Channel Select (CH) knob to select the desired working channel for the Individual Call. 11. Press the DSC/PRI key once. The TX indicator on the LCD flashes, indicating the RAY215E is ready to transmit. 12.
3-22 Operation with Minimum Function Handset 1. Press and release the DSC/PRI and D/L / I.C. keys simultaneously to place the unit in DSC mode. "70" appears in the large channel display, the DSC indicator illuminates, and "in" appears in the small channel display to designate Individual Call. 2. Press and release the SCAN/MEM key. A letter appears in the small channel display, which is associated with one of the other ship's MMSI numbers in the phonebook. 3.
3-23 Operation with Minimum Function Handset PRESS & REL DSC + D/L PRESS & REL SCAN Radio enters DSC mode PRESS & REL DSC ROTATE CH Select letter assigned to desired MMSI PRESS DSC ROTATE CH Returns to last used channel Select working channel Standby for ACK from specified ship ACK received from specified ship PRESS PTT [TX] Flashing 2 seconds after receiving ACK, switches to selected channel To store an MMSI number in phonebook: 1. Press and release the DSC/PRI and D/L / I.C.
3-24 Operation with Minimum Function Handset 7. Enter all 9 digits of the MMSI number in the same way. Note: The operation is cancelled if the 16 key is pressed or if no keys are pressed for 60 seconds during any part of this process. 8. Once the 9th digit has been entered and accepted, the RAY215E plays back the 9 digits just entered for proper entry verification. If the number is incorrect, press the DSC/PRI key once and release.
3-25 Operation with Minimum Function Handset 4. Press and hold D/L/I.C. The selected number is deleted from the phonebook and the radio switches to channel 16. Receiving an Individual Ship's Call When an Individual Ship's Call is received, the radio automatically enters DSC mode if you are currently on a selected working channel or private channel, in the Monitor mode, or in the Scan mode. When receiving Individual Ship's Call 1.
3-26 Operation with Minimum Function Handset 3.5.18.3 All Ships Call The All Ships Call is used to send out a message to all ships in range that you need assistance but the situation is not serious enough for a Distress Call. This call should only be used if hailing for assistance on channel 16 fails. There are three types of All Ships Calls: ROUTINE for normal calls, SAFETY for advisory alerts, and URGENCY for assistance when life is not in immediate danger.
3-27 Operation with Minimum Function Handset Press the DSC/PRI key once and the radio automatically selects channel 16. There is no acknowledge required for an All-Ship's Call. If you do not wish to accept the call, press the 16 key to exit the DSC mode. PRESS & RELEASE DSC Converse on channel 16 Receive All Ships Call: Routine, Safety, or Urgency 3.5.18.4 Group Call The Group Call feature sends transmissions that are only received by radios that share a common Group MMSI number.
3-28 Operation with Minimum Function Handset 3.5.18.5 Distress Call A Distress Call allows you to send out a digital "packet" of data at high power that includes your position, time, and MMSI number. All ships and stations outfitted with the correct type of DSC equipment will be able to pinpoint your position and either relay the information or respond directly. Using the Distress key overrides all other functions.
3-29 Operation with Minimum Function Handset PRESS & HOLD DISTRESS PRESS & HOLD DISTRESS After 1 sec, countdown begins Distress call transmitted Acknowledge signal received Hold DISTRESS for full 5 seconds Switch to Channel 16 Receiving a Distress Call When a DSC Distress call is received, the radio automatically enters DSC mode if you are currently on a selected working channel or private channel, in the Monitor mode, or in the Scan mode.
3-30 Operation with Minimum Function Handset 3.5.18.6 Distress Relay Call Sometimes a ship’s distress call can be relayed from another ship or a shore station. The RAY215E can only receive a Relayed Distress call that has been addressed to All Ships. If the radio is active on a working channel or private channel, in the Monitor mode or in the Scan mode when a Distress Relay Call is received, the unit automatically enters DSC mode and emits an alert tone.
3-31 Operation with Minimum Function Handset Notes: 1. After the ATIS ID number has been programmed, the ATIS function will be active all the time. You cannot disable it unless you have a Full Function Handset installed. 2. While ATIS is active (the ATIS indicator is illuminated), the Scan and Monitor functions are disabled. Also, certain channels are limited to 1 watt output power. 3. This is a one time operation.
3-32 Operation with Minimum Function Handset 8. If the number is verified as correct, press and hold the DSC key for 2 seconds and a tone sounds. Your ATIS ID number has now been stored in memory. 9. If the number is incorrect, press the DSC key once and release. The radio will revert to the beginning of the entry precess start over again. This step can be repeated as many times as required until the number is entered correctly.
4-1 Operation with Full Function Handset Section 4 4.1 Operation with Full Function Handset Introduction The RAY215E can be operated with the standard Minimum Function Handset, or an optional Full Function Handset that enables additional features, or both handsets to enable intercom capabilities. This section describes using the RAY215E with the optional Full Function Handset. See section 3 for operation using the standard Minimum Function Handset.
4-2 Operation with Full Function Handset In an emergency, the fist microphone / base station can override the full function handset to make a call even though the handset has priority (is off the cradle). To override the handset, press and hold the DSC/PRI key on the base station. The REMOTE indicator flashes and the base station regains priority control. Make your call as usual using the fist microphone. On the full function handset, OVERRIDE appears on the dot matrix display.
4-3 Operation with Full Function Handset 4.4 Controls and LCD Display Figure 4-2 Layout of Controls 4.4.1 Controls This section describes the control buttons and display messages that appear on the Full Function Handset. Note: This Full Function Handset is also used with Raymarine radios that have additional features. As a result, the yellow Function labels POWER (16 key), CELL (3 key), HAIL (* key), and FOG (# key) represent features that are not available on the RAY215E. RAY215_EURO Sect4.
4-4 Operation with Full Function Handset Note: An MMSI number is required to operate the DSC equipment in this radio. You can program the MMSI number yourself one time only using the Menu Operation described in Section 4.7.4.2 or you can have your Raymarine dealer program the number for you. ALL SHIP key Switches to the All Ships Call mode for Safety and Urgency transmissions. Descriptions of subsequent operations appear below in Section 4.6.18.6 Transmitting All Ships Call.
4-5 Operation with Full Function Handset 2/SCAN key This key inputs the number 2. When an alphanumeric response is appropriate, each press of this key alternately inputs the characters 2, A, B, then C. Pressing the FUNC key followed by the 2/SCAN key toggles Scan mode ON or OFF. Scan mode is described below in Section 4.6.15. & ' 3 key This key inputs the number 3. When an alphanumeric response is appropriate, each press of this key alternately inputs the characters 3, D, E, then F.
4-6 Operation with Full Function Handset " 8/M-CALL key This key inputs the number 8. When an alphanumeric response is appropriate, each press of this key alternately inputs the characters 8, T, U, then V. Pressing the FUNC key followed by the 8/M-CALL key starts Multi-Call mode. If the key is pressed during Multi-Call mode, the operation returns to normal mode. # 9/ 1/25 key This key inputs the number 9.
4-7 Operation with Full Function Handset FUNC key Initiates the Function mode and activates the FUNC indicator in the LCD display. The next key pressed determines the function selected. (See above key descriptions.) Pressing this key twice starts Dimmer mode, which reduces the brightness of LCD's backlight. Channel UP/ DOWN switch Pressing this switch during normal operation changes the channel number UP or DOWN.
4-8 Operation with Full Function Handset NMEA indicator Displayed when the radio receives valid NMEA position data. If the data is invalid or no data is received for a period of time, the indicator disappears. FUNC indicator Displayed when the FUNC key is pressed. Disappears when another key is pressed, or after no other key is pressed for a period of time. ! WX indicator Displayed while in Weather Channel mode (optional US frequency set only). TX indicator Displayed while transmitting.
4-9 Operation with Full Function Handset " VOL indicator (in bar graph) Represents the current sound volume level of the handset. A louder volume displays a larger number of segments in the bar graph. This bar graph is not displayed during Menu mode. # SQL indicator (in bar graph) Represents the current squelch level. A deeper squelch displays a larger number of segments in the bar graph. $ Three-digit, Seven-segment indicators Display the channel number or state of the radio.
4-10 Operation with Full Function Handset 8. Digital Selective Calling (DSC) Operation These functions include Individual Ships Call, All Ships Call, Distress Call, Group Call, and DSC logging capability. Note: An MMSI number is required to operate the DSC equipment in this radio. You can program the MMSI number yourself one time only, if permitted in your region, using the Menu Operation described in Section 4.7.4.2 or you can have your Raymarine dealer program the number for you. 9.
4-11 Operation with Full Function Handset 4.6.1 Setting the Volume The sound volume adjustment for the handset has 11 settings. Pressing and releasing the VOL UP ∧ key increases the volume by one level; pressing and releasing the VOL DOWN ∨ key reduces the volume by one level. The number of segments in the VOL bar graph on the LCD display will increase or decrease accordingly. If the VOL UP/DOWN keys are pressed and held, the volume levels will automatically change every half-second.
4-12 Operation with Full Function Handset 4.6.4 Setting the Frequency Mode The RAY215E can transmit and receive on all available International marine VHF radiotelephone channels. With a software upgrade, the RAY215E can also communicate on the US channel set. Indicators displayed in the LCD identify the active frequency group: US for the US frequency group, or INT for the International group.
4-13 Operation with Full Function Handset 4.6.5 Receiving on the Weather Channels weather channels are only active in US frequency mode and that the NOAA weather broadcasts can only be heard in the US and Canada. The US National Oceanic and Atmospheric Administration (NOAA) broadcasts constant weather reports and storm warnings that can be received in the US and Canada.
4-14 Operation with Full Function Handset If the Channel UP/DOWN switch is pressed and held for at least a half second, channels automatically change every 100 milliseconds. Using the Numeric Keypad To select a channel, input the desired number on the keypad. For 5 seconds the channel number flashes on the LCD display. If the ENT key is pressed during this 5 second interval, the channel change is implemented. If the 5 seconds elapse without pressing another key, the channel change is implemented anyway.
4-15 Operation with Full Function Handset Note: A license is required to operate the radio on the private channels. It is your responsibility to obtain the proper license to operate the radio on these frequencies. To select the Private Channel: 1. Press the FUNC key, followed by the 5/PRIV key. The assigned private channel number appears in the large channel display, preceded by a “P”. If multiple Private Channels are available, the first channel number appears. 2.
4-16 Operation with Full Function Handset 4.6.9 Multi-Call Operation The Multi-call function stores as many channels as desired in memory for quick access to frequently used channels. Using Multi-Call To start the Multi-Call operation, press the FUNC key followed by the 8/ M-CALL key. The Multi-Call channel used in the previous operation is displayed. Use the Channel UP/DOWN key to increment/decrement through the Multi-Call channels in memory.
4-17 Operation with Full Function Handset Deleting Channels from Memory From the Working Channel mode, select the channel to be deleted. Press the FUNC key followed by the 1/MEM key. The MEM indicator disappears when the channel is deleted. 4.6.11 Setting the Transmission Power Output The transmission output can be set at either 1W or 25W. When the power supply is switched on, the output is 25W. Pressing the FUNC key followed by the 9/1/25 key alternates the transmission between 25W and 1W.
4-18 Operation with Full Function Handset 4.6.14 Intercom Mode Intercom mode enables conversation between a Minimum Function Handset connected to the port on the front of the base station and a full function handset connected to the port on the rear of the base station. Note: Using the Intercom is a simplex operation. You must press PTT to talk to the other station and release PTT to listen. Making a Call from the Full Function Handset 1.
4-19 Operation with Full Function Handset 3. Press PTT to speak to the other station and release PTT to listen. 4. To exit Intercom mode, again press FUNC followed by 0/IC. Receiving a Call from the Base Station 1. When an Intercom call is received, the base station speaker emits a calling tone. IC appears on the large channel display and REMOTE flashes on the small channel display. 2. To answer the call, press PTT. The calling tone ceases and REMOTE stops flashing and appears solid.
4-20 Operation with Full Function Handset 1. Use the Channel Selection (CH) keys or numeric keypad to select the Working Channel or Private Channel you wish to enter into memory. 2. Press the FUNC key followed by the 1/MEM key. The MEM indicator illuminates, indicating that the channel is now in memory. Using Memory Scan This function is available only when at least one channel has been stored in memory. Press the FUNC key followed by the 2/SCAN key.
4-21 Operation with Full Function Handset Tri-Watch When the RAY215E is using the International frequency set, Tri-Watch monitors the Working Channel or Private Channel, the Priority Channel 16, and the previously selected Multi-call channel. When a signal is detected on the Working, Private, Priority, or Multi-call Channels, that channel becomes active. When there is no longer any activity on the channel, the RAY215E returns to Tri-Watch.
4-22 Operation with Full Function Handset If a GPS device is not connected via NMEA, the radio emits a 5-secondlong staccato alert tone and flashes the NMEA indicator 2 minutes after power up. This occurs every time the unit is turned on. The alarm is required by safety regulations and cannot be disabled. Operation at Power Up At power up, the radio monitors the NMEA line for 1 minute. If a signal is detected on NMEA, the radio determines whether the data is valid.
4-23 Operation with Full Function Handset 4.6.18 Digital Selective Calling (DSC) The Digital Selective Calling (DSC) protocol is a globally applied system used to send and receive digital Distress calls as well as Individual and All-Ships calls on channel 70, the dedicated DSC channel for Marine VHF.
4-24 Operation with Full Function Handset Transmitting an Individual Call To call another ship, you must select the Working Channel and a specific MMSI number. The MMSI number is selected either manually or from a Phonebook list of preprogrammed numbers specified using the MENU function. To cancel the call, press and hold the CLR key for 3 seconds. Press the INDV key to initiate the call data setup operation. After setting the call data, press the PTT switch to send the call.
4-25 Operation with Full Function Handset Note: The full function handset provides you with a phonebook that holds entries for up to 20 Ship stations and 20 Shore stations. These are separate from the 10 phonebook entries stored in the base station using the Minimum Function Handset (see Section 3.5.18.2). These 10 entries cannot be selected with the full function handset. BY MANUAL INPUT: Input the 9-digit MMSI number with the numeric keypad, then press the ENT key.
4-26 Operation with Full Function Handset Note: The working channel selected for the Individual Call is inserted as the working channel in item #5 above as long as it is an intership simplex channel. If it is not, the radio selects the next higher simplex channel to insert as the working channel. Response If a response is received after pressing the PTT switch, a receiveconfirmation message is displayed.
4-27 Operation with Full Function Handset INDV ENT After pressing ENT, the indication switches to: PHNBOOK, MANUAL Alternates with each click of SQ UP/DOWN 3. Select SHORE and press the ENT key. 4. Scroll with the SQ UP/DOWN keys to select the method for inputting the MMSI number, either from the phonebook or manually. Press ENT to input your selection. 5. Select the name by MMSI number from the phonebook by scrolling with the SQ UP/DOWN keys, and pressing the ENT key.
4-28 Operation with Full Function Handset numeric keypad ENT Flashing Flashing 6. Press ENT again. A prompt appears on the display instructing you to press the PTT switch. 7. Press PTT to transmit. ENT With manual input, MMSI number would be displayed Response If a response is received after pressing the PTT switch, a receiveconfirmation message is displayed. After 5 seconds have elapsed, the channel is shifted to a communication channel and the Individual Call is completed.
4-29 Operation with Full Function Handset 4.6.18.3 Receiving an Individual Call When an Individual Call is received, the DSC indicator flashes, Ind appears on the 7-segment display, and the DSC Received Alert is sounded. On the dot matrix display appears the message RECEIVED IND CALL along with the type of call: ROUTINE, SAFETY, or URGENCY. If the MMSI number exists in the Phonebook list, the associated name is also displayed. If no match is found, the actual numeric value of the MMSI is displayed.
4-30 Operation with Full Function Handset 4.6.18.4 Transmitting a Group Call You can send and receive DSC calls from groups of stations that share the same MMSI number. The RAY215E can only transmit ROUTINE Group calls. As with any DSC operation, the call is made on channel 70. To make a Group Call: 1. Set up the Group MMSI number as outlined in Section 4.7.3.4. 2. Press the INDV key. Ind appears on the 7-segment display, the DSC indicator is illuminated, and SHIP appears on the dot matrix display. 3.
4-31 Operation with Full Function Handset 9. Press PTT. The radio changes over to the selected Working Channel without waiting for acknowledgment. ENT MMSI number Select Working Chanel with SQ UP/DOWN key ENT ENT Scrolls between Working Chanel and MMSI number PTT 4.6.18.5 Receiving a Group Call When a Group Call is received, the DSC indicator flashes, Grp appears on the 7-segment display, and the DSC Received Alert is sounded. On the dot matrix display appears the message RECEIVED GRP CALL.
4-32 Operation with Full Function Handset Receiving Scrolls across display ENT MMSI number is displayed if the nickname is not registered in the list. 4.6.18.6 Transmitting an All Ships Call The All Ships Call is used to send out a message to all ships in range that you need assistance but the situation is not serious enough for a Distress Call. This call should only be used if hailing for assistance on 16 fails.
4-33 Operation with Full Function Handset ENT ENT Alternate by pressing the SQ UP/DOWN key 4.6.18.7 Receiving an All Ships Call When an All Ships Call is received, an alert is sounded. The LCD displays the type of All Ships call being received, along with the sender's MMSI number, and a prompt to press ENT to accept or CLR to log the call. The DSC Distress alert and the displayed message continue until either ENT or CLR is pressed.
4-34 Operation with Full Function Handset Unspecified Distress Call To make a Distress Call without specifying type of distress: 1. Open the door labeled DISTRESS on the back of the handset and press and hold the DISTRESS button. After one second, dSr flashes on the 7-segment display and the DSC indicator appears. On the dot matrix display, countdown message appears prompting you to hold the DISTRESS key for 4 more seconds. 2. Continue to hold the DISTRESS button for the duration of the countdown.
4-35 Operation with Full Function Handset press and hold CLR for 3 secs When a response is received, the DSC indicator flashes and the DSC Distress alert is sounded. The LCD scrolls a message that the DISTRESS has been acknowledged, along with the sending station's MMSI number or nickname. The message and alert are repeated until the CLR key is pressed. CLR Flashing When the CLR key is pressed, the unit exits the DSC mode continues monitoring Channel 16 on high power.
4-36 Operation with Full Function Handset To make a Distress Call specifying the type of distress: 1. Open the door labeled DISTRESS on the back of the handset and press and release the DISTRESS key on the back of the handset. dSr appears on the 7-segment display and the DSC indicator illuminates. On the dot matrix display, the message FIRE appears. press and release DISTRESS SQ UP/ DOWN 2. If FIRE is the message you wish to attach, press the ENT key.
4-37 Operation with Full Function Handset 5. When this prompt appears, release the DISTRESS key. The unit is switched to Channel 16, displays the message AWAIT ACK, and monitors channel 70 for an acknowledgment. release DISTRESS dSr stops flashing and the distress alarm sounds continuously. The unit retransmits the DISTRESS call at random intervals of 3.5 to 4.5 minutes, until a response is received or the call is manually cancelled. To cancel the DISTRESS call, press the CLR key and hold for 3 seconds.
4-38 Operation with Full Function Handset ENT CLR If CLR is pressed, the radio reverts to the mode before receiving Distress Call 4.6.18.10 Receiving a Distress Relay Call Sometimes a ship’s distress call can be relayed from another ship or a shore station. The RAY215E can only receive a Relayed Distress call that has been addressed to All Ships. When a Relayed Distress call is received, the DSC indicator flashes, dSr appears on the 7-segment display, and the DSC Distress alert is sounded.
4-39 Operation with Full Function Handset 4.6.19 ATIS Operation The RAY215E comes equipped with Automatic Transmission Identification System (ATIS) capability for inland waterway requirements in Europe. With ATIS enabled, each time the PTT switch is pressed your station ID is sent at the end of the transmission. Before utilizing this feature, you must obtain an ID number, program it into the RAY215E’s system Menu, and activate the ATIS feature.
4-40 Operation with Full Function Handset 4.7.2 NAVSTAT Operation This operation indicates on the LCD display the position information that has been input via NMEA or has been manually input using the LL/ENT function as outlined in Section 4.7.3.2. To view current position information: 1. Press the FUNC key followed by the MENU key to initiate the Menu operation. 2. Select NAVSTAT and press the ENT key. The following five items are automatically displayed at 3-second intervals in the following order: 1.
4-41 Operation with Full Function Handset 4.7.3 DSC Operation DSC operation includes the manual entry of latitude/longitude, listing of other ship’s MMSI numbers for ship-to-ship and ship-to-shore communications, and listing of Group MMSI number. To initiate the DSC operation: 1. Press the FUNC key followed by the MENU key to initiate the Menu operation. 2. Select DSC and press the ENT key. The 7-segment display shows dSC and the dot matrix display shows L/L ENT.
4-42 Operation with Full Function Handset ENT ENT Select with SQ UP/ DOWN 4. After selecting the desired distress type, press ENT. You are prompted to press the DISTRESS key. 5. To send the distress call at this time, press and hold the DISTRESS button. Follow the instructions on the display or the steps described in Section 4.6.18.8. 6. To cancel the distress call, press and hold CLR for 3 seconds. RAY215_EURO Sect4.
4-43 Operation with Full Function Handset 4.7.3.2 Manual Entry of Latitude/Longitude (L/L ENT) This operation is used to manually enter the latitude/longitude and UTC time when normal NMEA input of the position information is not available. The radio will sound a 5-second-long alert tone every four hours to remind you to update your position. 1. As described in Section 4.7.3 DSC Operation above, select the DSC operation L/L ENT.
4-44 Operation with Full Function Handset press ENT press 1 press 5 Flashing press ENT Flashing Flashing press 7 press ENT press 0 press ENT Flashing press ENT Flashing Flashing Flashing press ENT Flashing press 7 press ENT press 0 press ENT Flashing press 2 Flashing Flashing press ENT Flashing press ENT Flashing press ENT RAY215_EURO Sect4.
4-45 Operation with Full Function Handset 4.7.3.3 Modifying the MMSI Number List (PHNBOOK) This operation is used to modify the "phonebook" lists of MMSI numbers used for DSC Individual Calls. Two lists are available: one for Ship stations and one for Shore stations. Each list allows you to register the MMSI number and nickname for up to 20 Ship and 20 Shore stations.
4-46 Operation with Full Function Handset ENT Note: Pressing and holding the CLR key for 3 seconds during either ENTRY or DELETE returns operation to the mode before the Menu operation began. Adding Ship Stations to the List To add to the phonebook list for ship stations, input the MMSI number and nickname of the station. 1. To enter the MMSI number, press the corresponding numeric keys (0 through 9). The currently selected location is indicated by a flashing "–" character.
4-47 Operation with Full Function Handset ENT 0 Flashing Input remainder of MMSI number This display is shown only if the list already has the maximum 20 stations registered ENT 7/PQRS (twice) ENT Flashing 2/ABC ENT Flashing ENT Input remainder of MMSI name Flashing Flashing Flashing ENT Pressing ENT while "Y" is displayed registers the station and exits Menu mode. Pressing ENT while "N" is displayed exits Menu mode without registering the station.
4-48 Operation with Full Function Handset To exit without deleting, press the SQ UP/DOWN key until DEL? N is displayed. If the list has no stations entered, the message PHNBOOK IS EMPTY HOLD DOWN CLR KEY is displayed. Press and hold the CLR key for 3 seconds to exit Menu mode. ENT ENT Modifying the List of Shore Stations In this operation, a shore (coast) station is registered (added) to or deleted from the phonebook list. 1. Follow instructions in 4.7.3.
4-49 Operation with Full Function Handset Adding Shore Stations to the List To add to the phonebook list for shore stations, input the MMSI number and nickname of the station. 1. To enter the MMSI number, press the corresponding numeric keys (0 through 9). The currently selected location is indicated by a flashing "–" character. Pressing a numeric key enters that value then advances to the next digit's place. To go back by 1 digit, press the CLR key. 2.
4-50 Operation with Full Function Handset Note: The 0 key will enter only the numeral "0", while the 1 key will alternately enter "1" and "space". The 0 and 1 keys do not have associated alpha characters. Deleting Shore Stations from the List When the shore station phonebook is selected, the oldest MMSI number or nickname flashes on the dot matrix display. 1. Press the SQ UP/DOWN key to scroll through the registered stations until the station to be deleted is displayed. 2.
4-51 Operation with Full Function Handset Entering a Group MMSI Number To add a Group MMSI number, select ENTRY then press the ENT key. Use the numeric keys (0 through 9) to input desired group number. The currently selected location is indicated by a flashing "–" character. Pressing a numeric key enters that value then advances to the next place. To go back by 1 digit, press the CLR key. After the last position has been filled, the message CONT? Y appears.
4-52 Operation with Full Function Handset 4.7.4 Setting Operation This operation sets the function features of the RAY215E: the ATIS ID number and on/off state, and the MMSI number. 1. Press the FUNC key followed by the MENU key to initiate the Menu mode. Mn is shown on the 7-segment display and NAVSTAT appears on the dot matrix display. 2. Press the SQ UP/DOWN key to select SETTING. 3. Press the ENT key. The message SET appears on the 7-segment display.
4-53 Operation with Full Function Handset • The ATIS ID number is a ten digit number, beginning with a “9”. The MY ATIS set up process has you input only the last 9 digits. The leading “9” is automatically input for you. To register the ATIS Number into memory: 1. Select the MY ATIS function as described above in Section 4.7.4 Setting Operation. 2. Press the ENT key. The 7-segment display shows AId and the dot matrix display scrolls PLEASE PROGRAM ATIS ID. 3. Press ENT.
4-54 Operation with Full Function Handset 10. Press ENT to verify. The message ENT - STORE, CLR - EXIT is displayed. 11. Press ENT one last time to register the ATIS number in memory. Operation returns to the mode before the Menu operation began. To exit without making changes at any time, press and hold CLR for 3 seconds. ENT ENT Flashing Input last 9 digits of ATIS number using numeric keypad ENT ENT Flashing re-enter ATIS No. ENT ENT Flashing ENT RAY215_EURO Sect4.
4-55 Operation with Full Function Handset 4.7.4.2 Setting MMSI Number This operation stores the MMSI number required for DSC communications, including distress calls. You can request an MMSI number when you apply for a radio license. Notes: • Regulations in some regions may not allow end users to program their own MMSI number. If this unit was purchased to be used in such a region, this function will e disabled and the programming must be done by your Raymarine distributor.
4-56 Operation with Full Function Handset Pressing the following keys initiate the corresponding operation: Keys 0 - 9 keys ENT key CLR key Action Changes the flashing numeric value, then advances to the next digit's place. Advances the (flashing) subject item to the next one without changing the numeric value. Advances to the next screen after entering the last (ninth) digit. Returns to the previous subject item.
4-57 Operation with Full Function Handset ENT ENT Flashing Input MMSI number using numeric keypad ENT ENT Flashing re-enter MMSI No. ENT ENT Flashing ENT RAY215_EURO Sect4.
4-58 Operation with Full Function Handset 4.7.4.3 ATIS Set Up This operation determines whether to effect ID transmission of ATIS after the PTT switch is released. To set the ATIS function: 1. Per the description in Section 4.7.4 Setting Operation above, select ATIS. 2. Press the ENT key. The message ATS is shown on the 7-segment display and ATIS OFF appears on the dot matrix. 3. Press the SQ UP/DOWN key to toggle between ATIS ON and ATIS OFF. 4. After selecting the desired operation, press the ENT key.
5-1 Maintenance Section 5 5.1 Maintenance How to Contact Raymarine The RAY215E is designed to provide long periods of trouble-free operation. It is recognized, however, that environmental and other factors may result in a need for occasional service.
5-2 Maintenance Many Raymarine accessory items and parts are available through your authorized Raymarine dealer. However if you are in need of an item not available through your retailer feel free to contact our Customer Service department Monday to Friday 8:15 AM to 5:00 PM Eastern Standard Time. If you are uncertain about what item to choose for your Raymarine unit please contact our Technical Support Department Prior to placing your order at 1-800-539-5539 ext. 2065.
5-3 Maintenance 5.2 Preventative Maintenance The RAY215E has been constructed to be virtually maintenance free. Your attention to a few basic points should assure many years of service. 1. Although the unit is waterproof, always keep the unit as dry as possible. 2. Clean the exterior of the unit with a tissue or soft non-abrasive cloth. CAUTION Do not use solvents or other chemicals for cleaning this equipment. 3. Inspect the radio case and antenna for any physical damage. 5.3 Specifications 5.3.
5-4 Maintenance 5.3.2 Receiver Channels All available US and International VHF Marine Band Frequency Range 156.025 to 163.275 MHz in 25 kHz increments Frequency Stability +/- 10 PPM (+/- 0.001%) from -20 °C to +50 °C Usable Sensitivity 0.25µV @ 12dB SINAD Threshold 1.0µ full squelch Adjacent Channel Rejection 70dB Spurious Image Rejection 70dB Intermodulation Rejection 70dB Audio Output 2 Watts or more at 10% or less distortion into 4 Ohm load (internal) Hum & Noise in Audio Less than -40dB 5.3.
5-5 Maintenance Optional Full Function Handset (FFHS) Height 173 mm (6.81 inches) Width 57 mm (2.25 inches) Depth 28 mm (1.1 inches ) Weight Approx. 138 g (0.30 lbs) Optional FFHS Cradle Height 50 mm (1.97 inches ) Width 64 mm (2.52 inches) Length 102.1 mm (4.02 inches) Weight Approx. 70 g (0.15 lbs) (without cables) Optional FFHS External Speaker Height 114 mm (4.48 inches) Width 110 mm (4.33 inches) Depth 40 mm (1.57 inches) Weight Approx. 340 g (0.75 lbs) RAY215_EURO Sect5.
5-6 RAY215_EURO Sect5.
Maintenance 5.
5-8 Block Diagram RF PCB Maintenance
Maintenance Control PCB 5-9
5-10 Front PCB Maintenance Microphone PCB
6-1 Appendix Section 6 Frequency Tables International Mode Note: International VHF frequency usage varies from country to country. Ensure you are familiar with the channel requirements of the country where you are boating before using any VHF transceiver. Channel Number 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 1 16 17 1 18 19 20 21 22 RAY215_EURO Sect6.p65 International Mode TX Frequency (MHz) Type of Traffic Power TX RX 156.050 160.650 Public Correspondence (Marine Operator) Hi, Lo 156.100 160.
6-2 Appendix Channel Number 23 24 25 26 27 28 60 Frequency (MHz) TX RX 157.150 161.750 157.200 161.800 157.250 161.850 157.300 161.900 157.350 161.950 157.400 162.000 156.025 160.625 61 156.075 62 156.125 63 156.175 64 156.225 65 156.275 66 156.325 67 68 69 70 2 71 72 73 74 77 78 79 80 81 82 83 84 85 86 156.375 156.425 156.475 — 156.575 156.625 156.675 156.725 156.875 156.925 156.975 157.025 157.075 157.125 157.175 157.225 157.275 157.325 RAY215_EURO Sect6.
6-3 Appendix Channel Number 87A 88A Frequency (MHz) TX RX 157.375 157.375 157.425 157.425 Type of Traffic Public Correspondence, Port Operations Public Correspondence, Port Operations TX Power Hi, Lo Hi, Lo Notes: 1. For channels 15 and 17, output power is fixed at 1 watt only. Transmission at high power is not permitted. 2. Channel 70 is used for Digital Selective Calling (DSC) only and is not available for voice transmissions. Channel 70 does not appear on the display.
6-4 Appendix US Mode Frequency Table US Mode Channel Number 01A Frequency (MHz) TX RX 156.050 156.050 03A 05A 06 07A 08 09 156.150 156.250 156.300 156.350 156.400 156.450 156.150 156.250 156.300 156.350 156.400 156.450 10 11 12 13 1 156.500 156.550 156.600 156.650 156.500 156.550 156.600 156.650 14 15 2 16 17 3 18A 19A 20A 21A 22A 156.700 — 156.800 156.850 156.900 156.950 157.000 157.050 157.100 156.700 156.750 156.800 156.850 156.900 156.950 157.000 157.050 157.
6-5 Appendix Channel Number 66A 67 1 68 69 70 4 71 72 73 74 77 3 78A 79A 80A 81A 82A 83A 84 85 86 87 88A Frequency (MHz) TX RX 156.325 156.325 156.375 156.375 156.425 156.425 156.475 156.475 — — 156.575 156.575 156.625 156.625 156.675 156.675 156.725 156.725 156.875 156.875 156.925 156.925 156.975 156.975 157.025 157.025 157.075 157.075 157.125 157.175 157.225 157.275 157.325 157.375 157.425 157.125 157.175 161.825 161.875 161.925 161.975 157.
6-6 Appendix Weather Channels and Frequencies CH 1 2 3 4 5 6 7 8 9 0 RAY215_EURO Sect6.p65 RX Frequency 162.550 162.400 162.475 162.425 162.450 162.500 162.525 161.650 161.775 163.
