Installation Instructions

6.Ensuringthattheboltshaveaminimuminsertion
inthescannerbaseof16mm(0.63in.),and
amaximumof22mm(0.87in.)(allowingfor
washers),securethescannerwiththe4bolts,
atwashersandspringwashersprovided,as
illustrated.Ifnecessary,useappropriateshimsor
extrawasherstolimitthelengthofboltentering
thescannerbase.
7.Tightentheboltstoatorqueof15Nm(133ftlbf).
8.Attachasafetylanyard(notsupplied)toyour
vessel,andsecurethefreeendtothescanner
usingtheattachmentpointshowninthefollowing
illustration:
ItemDescription
1
Safetylanyardattachmentpoint.
Note:IfyouareinstallingtheRadarscannerona
sailingvessel,additionalprotectionfortheRadar
scannermayberequired.Referto6.3Radar
scannerprotection—sailingvessels.
MultipleQuantumRadarscanners
Only1(one)Quantum
™
Radarscannercanbeused
atanyonetime,pernetworkedsystem.
IfyouhavemorethanoneQuantum
™
Radarscanner
installedonyourvesselandwanttousethematthe
sametime,themultifunctiondisplaystowhichthe
scannersareconnectedmustNOTbenetworked
together.ThisappliestoQuantum
™
scanners
connectedeitherwiredorwirelessly.
Formoreinformation,referto:MultipleQuantum
Radars—moreinformation.
MultipleRadarscanners—location
requirements
Importantlocationconsiderationswheninstalling
multipleradarscannersonthesamevessel.
•Scannersshouldbemountedaboveeachother,
verticallyseparatedbyatleast0.5m(1.6ft).This
appliestoallinstallationlocationsonthevessel.
•Multiplescannersshouldbemountedinaway
thatminimizesinterferencebetweenthevertical
beamwidthsofthe2scanners.
•Inallcases,youshouldaimtoachieveasmuch
physicalseparationaspossible,tominimizeany
potentialinterference.
Mounting
41