Specifications

14 Operation/Wiring
3.3 Main Alarm
The PC/SeaTalk/NMEA Interface can be used to drive the
Raymarine Main Alarm (Cat No Z035). This alarm will sound as
soon as one of the following alarms is present on the SeaTalk bus:
• Deep Depth
•Shallow Depth
• Autopilot off course
• Watch alarm*
•Wind shift*
•Low battery*
• Large Cross Track Error*
•No NMEA data*
• NMEA Data error*
• No autopilot Main power
• No autopilot actuator (Drive stopped)*
• Radar Guard Zone Alarm
• Stern drive auto release
• Waypoint advance*
• Wind alarm
*The Main Alarm will sound 30 seconds after the instrument
alarm.
This allows the alarm condition to be cancelled and, therefore,
avoiding sounding of the main alarm.
81166_5.book Page 14 Friday, February 2, 2007 11:47 AM