Specifications

Mounting 3
Chapter 2: Mounting
Select a suitable location that is:
• away from direct contact with water
•clean and grease-free
• accessible for cabling
• reasonably well protected from physical damage.
1. Once a suitable location has been found, thoroughly clean the
surface with an alcohol based cleaner.
2. Remove the protective backing from the PC/SeaTalk/NMEA
Interface box and firmly press onto the mounting surface.
3. Alternatively, the PC/SeaTalk/NMEA Interface box may be
attached using the 2 self tapping screws provided.
D434-2
81166_5.book Page 3 Friday, February 2, 2007 11:47 AM