Installation guide

6 MK II Wheel Drive

Wheel drive

The Raymarine wheel drive will fit 3, 4, 5, 6, 7 or 8 spoke wheels. It is designed to operate with

steering systems with between 1 to 3.5 turns lock to lock.

Wheel drive – main parts

Installation stages

Installing the wheel drive involves four steps:

1. Drilling the spoke clamp holes in the front cover.

2. Securing the wheel drive to the wheel.

3. Attaching the pedestal bracket.

4. Connecting the drive to the course computer.

Clamp screw,

M5 x 16 mm (x6)

Wheel drive

front cover

Pre-drilled spoke

clamp holes (x2)

Bracket screw,

No 10 x 3/4 inch (x4)

Clutch lever

Motor tube

Cable socket

Cable plug

Bracket pin

Pedestal

bracket

D8886-1

Spoke clamp (x3) Clamp insert (x3)

87063_1.book Page 6 Monday, December 19, 2005 3:22 PM