Specifications

165mm 44mm
170mm
182mm 100mm
90mm
92 AUTOPILOTS
SPECIFICATIONS
Power supply 12V system
Absolute voltage range 10 – 16V DC
Mounting methods surface
Weight kg (lbs) 0.4 (0.88)
NMEA 0183 inputs 1
NMEA 0183 outputs 1
SeaTalk connections 1
RF transmitter and receiver Yes
Drive S1000 pump
S1000 FIT GUIDE (TYPICAL
Vessel type and size up to 25'
Steering type balanced
hydraulic
Steering ram capacity 80 – 200cc
Peak flow and rate 800cc/min
ORDERING INFORMATION
E12169 S1000 Smartpilot wireless autopilot system
Do you…
` Need an ‘extra pair of hands’?
` Want to reduce fatigue on long journeys out to a favourite fishing spot?
` Want better fuel economy and shorter routes to waypoints?
` Have a powerboat typically 7.7m (25') or under with a balanced hydraulic
system?
` Have a Seastar hydraulic system?
Yes? Then this is the autopilot for you
The S1000 ‘all-in-the-box’ autopilot is for powerboats with balanced hydraulic
systems (see www.raymarine.com for steering system compatibility).
Complete with everything needed for easy installation, the S1000 is quick to fit
and simple to use. No added complications from electronic compass or rudder
reference transducers – the S1000 doesn’t need them.
Control the S1000 autopilot with the S100 wireless remote; simply steer on to
your desired heading, press PILOT to engage the pilot in to auto and off you go.
To adjust your heading at any time, simply press the port/starboard arrow keys
until the heading you want is displayed. To disengage the pilot, press STANDBY
– that’s all there is to it!
S1000 INBOARD AUTOPILOT WITH
WIRELESS REMOTE CONTROL
RayStar125 GPS
Antenna
(optional extra)
S100 Wireless
Remote
Hydraulic pump
(connected
to steering
hydraulic system)
Raymarine
SeaTalk
Network
Connection
Control NMEA
Connection
Power Supply
Fishing Patterns
The S1000 incorporates a number of
dedicated fishing patterns. Patterns
include: Cloverleaf, Zig Zag and Circle.
What's in the box…
` Installation video – watch before you fit.
` Wireless S100 handheld controller with lanyard, belt clip and 2 (two) storage cradles.
` Easy-install S1000 course computer.
` Hydraulic pump supplied pre-assembled with swaged hydraulic hoses.
` Bleed kit: oil, container, gloves, wrenches and connectors.
S1000 Features
` A ‘back to basics’ point and shoot autopilot.
` Designed for balanced hydraulic systems.
` No electronic compass or rudder reference transducer needed.
` NMEA input from handheld or fixed GPS/Navigator/Plotter.
` Built-in fishing patterns include cloverleaf, zig-zag and circle.
` Troll at speeds as low as 1 knot (subject to environmental conditions).
` Can be linked to kicker motor.
` SeaTalk GPS/Plotter compatible.
PHOTO: © JOE MCCARTHY