Reference Manual Part 2

205 Chapter 20: Maintenance and Troubleshooting
• Settings reset.
• Settings and data reset.
After applying either of these, the system resets and returns you to
the power-on procedure.
Settings reset
When you apply a settings reset, all system set-up menus, page
sets and the data bar are reset to the factory default. Your way-
points, routes and tracks are NOT removed.
Settings and data reset
When you apply a settings and data reset, all the system settings
return to their default values and waypoint, route and track data
are deleted.
To apply a settings reset
1. Open the system Setup menu.
2. Select System Setup.
3. Select Settings Reset.
4. Press the YES softkey to confirm.
To apply a settings and data reset
1. Open the system Setup menu.
2. Select System Setup.
3. Select Settings and Data Reset.
4. Press the YES softkey to confirm.
20.3 Troubleshooting
All Raymarine products are subjected to comprehensive test and
quality assurance programs before packing and shipping. However,
if your system should develop a fault, this section will help you iden-
tify the most likely cause and suggest corrective action.
If, after using this section, you still have problems with your system,
contact your local dealer, national distributor or Raymarine Techni-
cal Services Department for further advice.
Always quote the product serial numbers which are printed on the
back of the unit.
This section is divided into problems associated with:
• Installation and display.
• Chart application.
• Fishfinder application.
• Radar application.
• Weather receiver.