Reference Manual Part 2

G-Series Reference Manual 198
19.1 Cautions
CompactFlash Card Installation
When installing CompactFlash cards ensure that the card is
fitted the correct way around. DO NOT try to force the card
into position as this may result in irreparable damage to the
card.
Water Ingress
To prevent the ingress of water and consequent damage to
the unit, ensure that the chart card door is firmly closed at
all times. This can be confirmed by an audible click.
Card Removal
DO NOT use a metallic instrument such as a screwdriver or
pliers to help you remove a card, as doing this can cause
irreparable damage.
Card writing
CompactFlash cards can be damaged if they are removed
from the unit during either a read or write operation. A
warning is displayed during write operations. The unit is
continually reading the card. It is therefore essential that
before removing the card you follow the correct procedure
to stop access to the card.
Note: Raymarine recommends the use of SanDisk Standard
Compact Flash memory for reliability.
19.2 Card insertion and removal
You can remove and insert cards while a chart is displayed pro-
vided that you follow the correct procedure. Chart information is
retained on-screen until the chartplotter redraws the screen; for
example, when you pan outside the current area, or use the
RANGE button to change the chart scale.
Cartographic data is available on any monitor.
Card removal
Only remove the card while the CF Card Removal message is dis-
played. This is opened through the setup menu, documented
below. Once the message is closed, the card should no longer be
removed
If you try to remove a card without accessing the setup menu, a
blue screen and warning message is displayed and the unit must
be restarted.
To insert a CompactFlash card
1. Check that you are using the correct type of card (see Important
Information, at the beginning of this manual).
2. Open the chart card door.
3. Insert the card with the lip of the card facing inwards. It should
position easily. If it does not, DO NOT force it but check the
direction in which the lip is facing.
4. Gently press the card home.
5. To prevent the ingress of water and consequent damage, close
the chart card door and press firmly until it clicks.
To remove a CompactFlash card with the unit powered
up
1. Press the MENU button to open the system Setup menu.
2. Select Remove CF Card.
3. When you see the message telling you it is safe to do so,
remove the card. Do not remove a card until you see the
pop-up saying it is safe to do. Otherwise you could lose
data.
4. Open the chart card door.
5. Grip the card and pull to remove it from its slot.
6. To prevent water damage, close the chart card door and press
firmly until it clicks.
7. Press OK.
To remove a CompactFlash card with the unit powered
down
1. Open the chart card door.