Reference Manual Part 2

G-Series Reference Manual 194
System Integration Setup Menu
Note: If AIS or Navtex has been set on any display in the system,
the menu options will be available on all displays. Navtex
and AIS are available simultaneously.
Alarm Setup Menu
The Alarm Setup Menu has five sub-menus:
• System Alarms Setup
• Navigation Alarms Setup
• Radar Alarms Setup
• Fishfinder Alarms Setup
• AIS Alarms Setup
System Alarms Setup
System alarms sound in all applications.
MENU ITEM OPTIONS
DSC Message
When set to ON, details of distress DSC messages are
displayed on screen
ON
OFF
SeaTalk Alarms
When set to enabled, all SeaTalk system alarms are
received and displayed on the chartplotter.
Enabled
Disabled
Data Master
When set to ON, the display you are working on is
defined as the master.
ON
OFF
Bridge NMEA Heading
Used to prevent NMEA heading data being bridged
onto the SeaTalk bus. Switch this function off if you are
using MARPA with an external fast heading sensor.
ON
OFF
NMEA Output Setup
Allows you to switch off individual NMEA out sentences
APB, BWC, BWR,
DBT, DPT, GGA,
GLL, MTW, RMA,
RMB, RMC, RSD,
RTE, TTM, VHW,
VLW, VTG, WPL,
ZDA
NMEA Port Setting
Select the appropriate setting dependent on the equip-
ment attached to the NMEA port for each individual
display.
When Navtex 4,800 or 9,600 selected, the option to
view the Navtex message list is available.
NMEA 4,800
Navtex 4,800
Navtex 9,600
AIS 38,400
MENU ITEM OPTIONS
Anchor Alarm
Switches the anchor alarm on or off.
OFF
ON
Anchor Alarm Radius
If the Anchor Alarm is set to ON, an alarm is triggered
when you drift from your anchor position by more than
the specified distance.
0.01 - 9.99 nm
0.10nm
(or equivalent in the
selected Distance
Unit)
Timer
Switches the countdown timer alarm on or off
OFF
ON
Timer Period
If the Timer is set to ON, the system counts down from
the time you specify. An alarm is triggered when zero is
reached.
00h01m - 99hrs
59mins
00h00m
Alarm Clock
Switches the alarm clock on or off.
OFF
ON
Alarm Clock Time
If the Alarm Clock is set to ON, an alarm is triggered
when the time you specify is reached.
00.01 - 24:00hrs
00:00