Reference Manual Part 2

189 Chapter 18: System Setup and Customizing
The table below lists the data available.
Log trip
You can view the total distance travelled (Log) and the distance of
your current journey (Trip) based on your speed through water
(STW) from a speed transducer.
In addition you can include in your data application or databar,
ground log and four ground trip counters based on your GPS posi-
tion. These counters are updated every minute and can be
individually reset from the system setup menu.
If the GPS fix is lost or if the system simulator is switched on, the
system will pause the ground log and trip counters. When the GPS
fix returns, or the system simulator is switched off, the ground log
and trip counters resume.
18.3 Compass bar
The compass bar gives you a continuous readout centred on your
current heading or course over ground (COG). Arrows at either end
of the bar indicate current steer direction.
When displayed, it replaces the databar and is always positioned at
the top of the screen.
Data groups Data (abbreviations in brackets)
VESSEL
Vessel position (Ves Pos)
Course over ground/Speed over ground
(COG/SOG)
Heading
Speed
Wind velocity made good (VMG Wind)
Waypoint velocity made good (VMG Wpt)
Log trip
Log
Trip
Ground Log/Trip 1
Ground Log
Ground Trip 1
Ground Trip 2
Ground Trip 3
Ground Trip 4
Rudder
NAVIGATION
Cross track error (XTE)
Waypoint (WPT)
DEPTH Depth
ENVIRONMENT
Pressure
Air temperature (Air Temp)
Sea temperature (Sea Temp)
Set drift
WIND
True wind
Apparent wind (App Wind)
Ground wind
TIME AND DATE
Local time
Local date
CURSOR POSITION
Cursor position (Csr Pos)
TRANSDUCER STATUS
Transducer status
Data groups Data (abbreviations in brackets)