Reference Manual Part 2

G-Series Reference Manual 188
The system Setup menu is split into sections: application-specific,
external equipment and system-wide.
Application-specific menus are context-sensitive. The menu that
opens is appropriate to the application in the active window when
you press the MENU button.
• For application-specific setup menu details, refer to the appro-
priate application chapter of this book.
External equipment menus provide options to set up external
equipment that is connected to your G-Series system. This might
include AIS, Navtex, GPS or Compass equipment; the options
available on the menu depend upon what is connected.
System setup menus control functions throughout the system.
When you first power on your system, default values are used. The
tables that follow show the sub-menus, settings and options that
are available to customize those defaults.
Changes you make on one display affect all displays in the net-
work, with the exception of Display Setup, Databar Setup and
Select Page set.
18.1 Page sets
If none of the default page sets suit you, you can edit them to dis-
play the application and page layouts you want.
To configure a page set
1. Open the system Setup menu.
2. Open the Select Page Set screen.
3. Highlight the page set you want to edit.
4. Press the appropriate softkey:
EDIT PAGE SET
RENAME PAGE SET
RESET TO DEFAULT PAGES
5. Follow the on-screen instructions for the option you selected.
6. Press OK.
18.2 Databar
Configuration options available on the Databar Setup screen
include:
• Position on screen
At the top or on the side of the display.
• Size
For the top position, set to large or small.
• Data displayed
Note: The databar configuration applies only to the display on
which you are working.
To configure the databar
1. Open the system Setup Menu.
2. Select Databar Setup then Configure.
3. Press the appropriate softkey:
ADD DATA
REMOVE DATA
MOVE DATA
4. Follow the on-screen instructions.
5. Press OK when complete.