Reference Manual Part 2

181 Chapter 16: The Data Application
• Cell data: a cell can contain any transducer- or internally-calcu-
lated data that is available on NMEA or SeaTalk. Additional
data includes a compass gauge, a distance log and four reset-
table trip counters.
• Type of display: data can be shown in numerical, gauge or
graphical format as appropriate.
To rename a panel
1. Press the MENU button and select Panel Setup Menu.
2. Select the panel you want to rename.
3. Press the RENAME softkey.
4. Set the name.
5. Press OK.
To select data for a cell to contain
1. Press the MENU button and select Panel Setup Menu.
2. Select the cell you want to assign data to.
3. Press the SELECT DATA softkey.
4. Select the data type and format.
5. Press OK.
To split cells
1. Press the MENU button and select Panel Setup Menu.
2. Select the cell you want to split.
3. Press the vertical or horizontal SPLIT CELL softkey as
appropriate.
The direction in which the selected cell will be split is indicated by
an arrowhead on the softkey label.
To merge cells
1. Press the MENU button and select Panel Setup Menu.
2. From the pair of cells you want to merge, select either the left-
or upper-most cell.
3. Press the vertical or horizontal MERGE CELLS softkey as
appropriate.
The direction in which the cells will be merged is indicated by an
arrowhead on the softkey label.