Reference Manual Part 2

171 Chapter 14: Sirius Audio (US only)
To browse channels
1. On the Sirius Audio Control screen, press the BROWSE
softkey.
Pressing this key displays the Channel List or Preset List for
browsing. Toggle between the two lists with the VIEW ALL/PRE
softkey.
2. Use the rotary controller or trackpad to scroll through the
channels.
3. Press the TUNE TO CHANNEL softkey (or the rotary controller)
to listen to the selected channel.
To go back to the Sirius Control screen, press OK or CANCEL.
Filtering categories from the browse
This feature allows you to choose a category from which to browse
channels; other categories are excluded from the browse.
To filter categories
1. On the Browse screen, press the FILTER BY softkey.
2. Press the SELECT CATEGORY softkey.
3. Using the trackpad or rotary controller, select the category you
want to browse.
4. Press OK.
14.4 Scanning channels
The Scan function automatically tunes to all channels in turn.
To scan channels
1. Press the SETUP CHANNELS softkey.
2. Select SCAN CHANNELS.
3. Use the SCAN ALL/PRE softkey to choose to scan all channels
or only preset channels.
4. Press SELECT to stop the scan and listen to the active
channel.
14.5 Hiding or showing channels and
categories
You can select particular channels and categories to be excluded
(hidden) from the Browse and Scan sequences.
To hide or show a channel or category
1. Press the SETUP CHANNELS softkey.
2. Select EDIT CHANNEL ACCESS.
3. In the channel list, select the channel you want to hide. If you
want to hide a category, select any channel in that category.
4. Toggle between hidden and shown states with either the
CHANNEL SHOWN/HIDDEN or CATEGORY SHOWN/
HIDDEN softkeys.
14.6 Presets
You can assign up to 18 channels to presets to make tuning, scan-
ning and browsing easier. To assign a channel to a preset, use the
PRESETS softkey from the main control screen or the EDIT PRE-
SETS softkey from either of the following screens:
• Setup channels
• Browse channels
At the Edit Preset Channels screen you can select a preset and
assign a channel to it, move the assigned channel to a different
preset, or delete the assigned channel.
Toggle between the Preset Channels list and the Channel List
either by using the trackpad (left/right) or by pressing the appropri-
ate softkey.
To assign a channel to a preset
1. Select an unused preset number from the Preset List.
2. Press the ASSIGN NEW CHANNEL softkey.
3. Select the target channel from the Channel List.
4. Press the ASSIGN TO PRESET softkey.