Reference Manual Part 2

G-Series Reference Manual 130
11.2 Controlling power to the scanners
You control power to the radar scanners from the power control toolbar, which you open with the power button on the G-Series keyboard:
There are three power states for the radar scanners:
• Off.
• On and in standby: powered up and ready to transmit.
• On and in transmit (TX): rotating and transmitting.
The default power mode is on and in standby.
To change scanner power states
1. Press the power button.
2. Toggle to your desired power state on RADAR 1 or RADAR 2
as appropriate.
You can turn the radar scanners off even if there is no display, or if
the display is blank for any reason. In this situation, a message on
the keyboard LCD screen prompts you.
To switch scanners off when the monitor is blank
1. Press the power button.
A prompt on the keyboard LCD says “To switch radars off
press power”.
2. Press the power button.
PWR
RADAR 1
TX STBY
RADAR 1
ON OFF
RADAR 2
TX STBY
RADAR 2
ON OFF
MONITOR
CONTROLS
D10569-1