User's Manual Part 2

PART II. Service Manual
1417WGC/WCC 136
4.3 Auto Trigger Mode
Follow these instructions when the panel auto triggers on its own and/or unintentionally acquires
blank images.
1. Open “_vadav.lnk” from "C:\davinci”.
2. Click the "Calibration & Acquisition" tab.
3. Click "Edit".
4. Change "Auto Trigger Threshold" from 5 to 100 and click "OK".
 The Auto Trigger Threshold default value are 50 for CsI models and 30 for GdOS
models