User's Manual Part 2

PART II. Service Manual
1417WGC/WCC 126
4. Select "Firmware/FPGA Update" and click "Select" to browse the Firmware and FPGA.
Once the files are selected, click "Start Setting".
 Firmware File: File extension is either Davinci or tar.
 FPGA file: File extension is bin.
5. Click "OK" once the message below pops up.
6. Turn off the power of detector and after 5 seconds, turn the power back on.
 Detector IP address might be changed to 192.168.1.80 after updating depends on
Firmware.