User's Manual Part 2

PART II. Service Manual
1417WGC/WCC 123
2.2 SSID, PSK (Pre-Shared Key) Set Up
1. Turn on the power of the detector and connect it to the PC. (IP address: 2.2.2.100)
[Connect as wired mode (IP address: 2.2.2.101) with Link cable or wireless mode (IP
address: 2.2.2.100).]
2. After the power of detector is on, open "FPD_Manager.exe".
3. Type the detector's current IP address in "Detector IP Address" from "Current Setting" as
below.
 Detector's Ethernet Controller is operated with Second IP address,
192.168.124.80.
4. Current SSID and PSK (Pre-Shared Key) is displayed once the "Get Current Settings"
button is pressed.