User's Manual Part 2

PART II. Service Manual
1417WGC/WCC 121
2. FPD Manager Instruction (IP, SSID Set Up / Firmware, FPGA Update)
2.1 Detector IP Address Set Up
1. Turn on the power of detector and connect with PC. (IP address: 2.2.2.100)
[Connect as wired mode (IP address: 2.2.2.101) with Link cable or wireless mode (IP
address: 2.2.2.100).]
2. After the power of detector is on, open "FPD_Manager.exe".
3. Type detector's current IP address at "Detector IP Address" from "Current Setting" as below.
 Detector's Ethernet Controller is operated with Second IP address,
192.168.124.80.