User's Manual Part 2

PART I. User & Installation Manual
112 1417WGC/WCC
3. Press the "Mode select button" turn on the detector twice (within 2 seconds) and transfer to
"sharing mode".
 Mode status can be checked by the OLED window of Detector

4. When approaching the detector with USB IrDA connecting to the PC, transfer the Serial
Number information of detector.
5. Based on the transmitted Serial Number, the CAL folder at the PC is created and the
shooting condition is set then USB IrDA of PC transfers IP/SSID information with Detector.
6. Detector sets the shooting conditions with the IP/ received SSID.
 STA Mode: Detector is set by information of wireless router.
 AP Mode: PC connects to S/N AP Host name’s wireless router (Detector).
7. If the shooting condition setting is completed, completion status appears at the "OLED
window" and "Sharing mode" is turn off.

IrDA LED Color Status
Green Connected PC
Blinking Orange Transfer the data
End Blinking
Turn on Green
Transfer success
End Blinking
Turn off Green
Transfer fail