User's Manual Part 1

PART I. User & Installation Manual
60 1417WGC/WCC
Set up SW
1. Connect the Detector and turn on the power.
2. Choose AP Mode by pressing and holding the Mode button
LED LED Color Mode
MODE
Orange Station Mode(Wireless)
Green AP Mode(Wireless)
None Wired Mode
Blinking Orange and Green
alternatively
Sleep Mode
3. Choose the SSID (detector's SN) from Wireless Network Connection list. (PW: project302)
4. Open “_vadav.lnk” from “C:\davinci”.
Once the program is opened and the detector is connected, the LINK LED light will blink
and the Detector Status will display detector information as below.