User's Manual Part 1

PART I. User & Installation Manual
20 1417WGC/WCC

Do not subject cells or batteries to mechanical shock.
 In the event of a cell leaking, do not allow the liquid to come into contact with the skin
or eyes. If contact has been made, wash the affected area with copious amounts of
water and seek medical advice.
 Equipment should be designed to prohibit the incorrect insertion of cells or batteries
and should have clear polarity marks. Always observe the polarity marks on the cell,
battery and equipment and ensure correct use.
 Do not mix cells of different manufacture, capacity, size or type within a battery.
 Seek medical advice immediately if a cell or battery has been swallowed.
 Consult the cell/battery manufacturer on the maximum number of cells, which may be
assembled in a battery and on the safest way in which cells may be connected.
 A dedicated charger should be provided for each equipment. Complete charging
instructions should be provided for all secondary cells and batteries offered for sale.
 Keep cells and batteries clean and dry.
 Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
 Secondary cells and batteries need to be charged before use. Always refer to the cell
or battery manufacturer’s instructions and use the correct charging procedure.
 Do not maintain secondary cells and batteries on charge when not in use.
 After extended periods of storage, it may be necessary to charge and discharge the
cells or batteries several times to obtain maximum performance.
 Secondary cells and batteries give their best performance when they are operated at
normal room temperature.
 Retain the original cell and battery literature for future reference.
 When disposing of secondary cells or batteries, keep cells or batteries of different
electrochemical systems separate from each other.
 Contact the Rayence Customer Service team to destroy a battery.
CAUTION
Recommendations to the end-users
 The following represents a typical, but not exhaustive list of good advice to be provided
by the equipment manufacturer to the end-user.