User's Manual

PART II. Service Manual
1417WGC/WCC 96
3. Set Manual bad pixel map (BPMM) as below.
No. Overview
1
At Figure 1, choose S from the list of M(
❶
) and click "BPM". Check if BPMM window is
popped up as Figure 3.
2 Choose "Bad" from Pixel list (Figure 3 -
❷
).
3 Choose either “row” or “col” from Figure 3 -
❸
.
4 Put the coordinate of pixel to set bad pixel at Figure 3 -
❹
.
5
If bad pixel is a line, put the range as below at Figure 3 –
❺
.
From To
Row 0
3327(127type)
2449(140type)
Col 0
2815(127type)
3051(140type)
If bad pixel is not a line but some pixels, put the rest coordinate at Figure 3 -
❺
.
6 After completing step 5 , check if bad pixel has been changed to green as Figure 2 -
❻.
7 Click “Fill” at Figure 3 -
❼
.
8 Click "Save" at Figure 3 -
❽
.
4. Once setting BPMM is done, “BPMM.raw” file will be saved at C:\Davinci\CAL.