User's Manual

PART II. Service Manual
1417WGC/WCC 15
WARNING
Maintenance and Inspection
 For safety reasons, be sure to turn off the power of the detector when the following
inspections are going to be performed. Otherwise, it may result in electric shock.
 When the detector is going to be cleaned, be sure to turn off the power of each
detector, and unplug the power cable from the AC outlet.
Do not use any type of solvent, such as benzene. Otherwise, fire or electric shock may
result.
Wear waterproof gloves to protect your hands from direct contact with IPA (Isopropyl-
alcohol) or any other liquid.
 Maintenance of the detector should be done by an authorized service provider. If
problem still cannot be corrected, it may result in fire or electric shock.
WARNING
Wireless Connection
 SSID & PSK value should match to Router’s setting. If these values are not matched
with Detector and Router, the connection is not allowed for security.
 Avoid using co-channel or adjacent-channel with other wireless devices for high quality
wireless performance.
 Transmitting omnidirectional radio wave and sending same information to different
place at once is against the law.
 Any service related to the human life safety cannot be supported since this wireless
detector has potential electric wave interference.
 This wireless detector has potential electric wave interference during use.