User's Manual

PART II. Service Manual
1417WGC/WCC 113
4.4.9 OLED function
1. OLED is operating when detector is turned on.
2. Use the Mode select button and Power button can be used OLED function as follows.
 1 click  Press the mode select button
 2 click  Press the mode select button twice (within 2 seconds)
 10 sec  Press the mode select button for 10 seconds
 1 click  Press the power button
 Normal menu
 - Will Show the (Time / Battery remain / Wireless signal) of
detector
 Sharing menu  - Operation the “sharing function”
 Storage menu  - Operation the “storage function”
 SSID menu  - Will Show the SSID information of detector
 PSK menu  - Will Show the PSK information of detector
 IP Menu  - Will Show the IP information of detector
 Mask menu  - Will Show the Mask information of detector
 Factory reset menu  - Factory reset menu