User Manual

TROUBLESHOOTING / FAQ

BLUETOOTH CONNECTION / SOUND INTERFERENCE?

SPEAKER WILL NOT TURN ON?

MULTI-LINK IS NOT WORKING?

HOW DO I USE THE SIM CARD MODE?

HOW LONG DOES IT TAKE CHARGE THE SPEAKER?

HOW LONG DOES THE SPEAKER LAST?

HOW DO I KNOW IF THE BATTERY IS LOW?

• Ensure speaker is within 10 meters (33 feet) of connected Bluetooth device

• Check the battery level: If the battery level of either the speaker or your connected

device is low, it can cause the connection to be weak or to drop.

• Charge the speaker: Make sure the speaker is fully charged by plugging it into a

power source using the provided charger cable.

• Check the Power Button: Make sure the Power Button on the speaker is not stuck or

broken. Press the Power Button ﬁrmly to ensure it is engaging.

• Reset the speaker: Follow the Reset Instructions in this user manual to reset the

speaker.

• Conﬁrm both speakers are charged, powered on, and they are both disconnected

from any Bluetooth device and in Pairing Mode.

• Be sure to use only one speaker as the parent device by holding the Play Button on

just one speaker.

• Ensure both speakers are in close proximity of each other.

• First, disconnect the speaker from any previously connected devices

• Insert a SIM Card into the back of the Speaker

• Speaker will automatically switch into “TF Mode”

• When successful, a blinking blue LED will appear above the Power mode indicating

a successful operation and start to play your media ﬁles

• It takes approximately 3 hours to fully charge the Impact Speaker from 0%.

• Enjoy epic sounds for 15 hours at 50% Volume

• When the speaker’s battery has 30 minutes le of playtime, the low battery prompt will

begin to broadcast, and the low battery prompt tone will be played every 10 minutes.

https://rayconglobal.com