Datasheet

Tyco Electronics Corporation Tyco Electronics UK Ltd. Tyco Electronics Raychem K.K. Tyco Electronics Singapore Pte Ltd.
300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters
Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2
USA United Kingdom Japan Singapore 569507
Tel:[phone] (US & Canada) Tel: [phone] Tel: [phone] Tel: [phone]
Tel:[phone] (All other countries)
Users should independently evaluate the suitability of the product for their application.
For more information about this product visit www.tycoelectronics.com and www.raychem.com
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their
application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability
regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and Conditions of Sale for these products and in no
case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of
the product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the
right to make changes in materials or processing without notification to the Buyer which do not affect compliance with any applicable specification.
Approvals
UL E85381 (Black only)
MIL-DTL-23053/4 Class 3 (Black only)
3:1 Shrink ratio only (excludes sizes 9/3, 19/6)
VG 95343 (clear 3:1 only)
VDE 0341/Pt 9012 (clear 3:1 only)
Performance
Test Test method Test requirement
Tensile strength: ISO 37 9 MPa (min)
Ultimate elongation: ISO 37 300% (min)
Inner wall adhesion: 60 N per 25 mm (min)
ATUM to aluminium
Heat shock: 4 h at 225°C Pass - no dripping, cracking or flowing of outer wall
Heat ageing: 168 h at 150°C Pass - no dripping, cracking or flowing of outer wall
Low temperature flexibility: 4 h at -55°C Pass - no cracking
Dielectric strength: IEC 243 12 MV/m (min)
Fluid resistance: 24 h at 23°C, ISO 37 Tensile strength: 7 MPa (min)
Ultimate elongation: 300% (min)
Inner wall adhesion: 60 N per 25 mm (min)
Test fluids: Diesel fuel (BS 2869 class A1)
Hydraulic fluid (H-515)
Lubricating oil (O-149)
For full product performance details consult Raychem Specification.
Specifications
Raychem Specification RW 2063. (Black) RK6024 (colors and clear)
Material Safety Data Sheet available on request.
Installation instructions available on request.
Raychem and ATUM are trademarks of Tyco Electronics Corporation.
© 2001 Tyco Electronics Corporation H00000 2/02