Datasheet

Fax-on-demand Fax ID Description
US only [phone] 3152 SCD
Outside US [phone] 3153 SCD-25/225
Visit our website at www.tycoelectronics.com
Users should independently evaluate the suitability of the product for their application.
Before ordering check with factory for most current data.
4-87 Molded Parts
Materials available
Material* Material description Precoating no. Adhesive part no.**
-3 Semirigid polyolefin /42 or /86 S-1017 or S-1048
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Viton N/A S-1255-04
-25 Fluid-resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
-100 Polyolefin, Zerohal /180 S-1030
J end coated only, S1030 tape
supplied in bag for H end
*For more information, please see the appropriate material page in this section.
**For more information, please see Section 5 of this catalog.
Product dimensions (mm/in)
HJPR
Min. Min. Max. Min. Min. Max.
Part -3, -4, -25 -100 -3, -4, -25 -100 ±10% ±10%
number a a b a a b b b
222K121 24.0 (.95) 24.0 (.95) 10.4 (.41) 24.0 (.95) 14.0 (.55) 5.6 (.22) 25.0 (.98) 25.0 (.98)
222K132 30.0 (1.18) 30.0 (1.18) 14.2 (.56) 30.0 (1.18) 15.0 (.59) 5.9 (.23) 32.0 (1.26) 27.0 (1.06)
222K142 31.0 (1.22) 31.0 (1.22) 18.0 (.71) 31.0 (1.22) 18.0 (.71) 7.1 (.28) 39.0 (1.54) 31.0 (1.22)
222K152 36.0 (1.42) 36.0 (1.42) 22.4 (.88) 36.0 (1.42) 21.0 (.83) 8.4 (.33) 46.0 (1.81) 38.0 (1.50)
222K163 43.0 (1.69) 43.0 (1.69) 28.2 (1.11) 43.0 (1.69) 25.0 (.98) 9.9 (.39) 55.0 (2.17) 45.0 (1.77)
222K174 60.0 (2.36) 52.0 (2.05) 35.1 (1.38) 60.0 (2.36) 39.0 (1.54) 15.7 (.62) 80.0 (3.15) 54.0 (2.13)
222K185 66.0 (2.60) 66.0 (2.60) 44.5 (1.75) 66.0 (2.60) 42.0 (1.65) 16.8 (.66) 108.0 (4.25) 68.0 (2.68)
JO HW JW X Y
±10% ±20% ±20% ±20% ±20%
bb bbb
222K121 8.5 (.33) 1.3 (.05) .41 (.016) 18.0 (.71) 16.0 (.63)
222K132 8.5 (.33) 1.5 (.06) .61 (.024) 18.0 (.71) 20.0 (.79)
222K142 15.0 (.59) 1.8 (.07) .81 (.032) 18.0 (.71) 20.0 (.79)
222K152 18.0 (.63) 1.8 (.07) .81 (.032) 25.0 (.98) 25.0 (.98)
222K163 17.5 (.69) 2.0 (.08) .81 (.032) 25.0 (.98) 30.0 (1.18)
222K174 32.0 (1.26) 3.3 (.13) 1.02 (.040) 25.0 (.98) 45.0 (1.77)
222K185 48.0 (1.89) 3.8 (.15) 1.63 (.064) 35.0 (1.38) 70.0 (2.76)
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 mm (.06") max.
4-Molded Parts for UK 30/9/02 10:45 am Page 87