Specifications

IMPORTANT: DURING CLEANING CARE MUST BE

TAKEN NOT TO DAMAGE THE CERAMIC FIBRE

INSULATION.

SEE FIG. 5 & 5A

1. TO REMOVE THE HOTPLATE: Remove the bolt and

washers from inside the Roasting Oven (top left hand

side)

Lift insulating covers and remove 2 screws from the

hotplate, then remove hotplate using lifting tool

provided.

2. Clean the flueway by inserting the flexible brush

through top plate aperture, directing it towards the

flue outlet. Scrape the deposits towards the burner

chamber.

3. Thoroughly clean burner chamber flueway

4. Carefully vacuum any debris that has fallen down into

the burner chamber.

SEE FIG. 5A, 5 & 6

1. Open the top oven door.

2. Remove side and base access doors using hex. driver.

3. Thoroughly clean, top side and base flueways through

access apertures with brush.

4. Remove all debris with vacuum cleaner.

5. Replace side and base access doors. Secure in

position using hex. driver.

6. Brush and clean in between hotplate ribs on

underside.

7. Examine soft rope seal located around hotplate

aperture in top plate. Replace if frayed or damaged.

8. Replace hotplate ensuring the underside ribs lie over

the oven.

NOTE: Ensure that the hotplate is fitted correctly as this

forms part of the cooker combustion circuit.

BURNER CHAMBER

OVEN & HOTPLATE FLUEWAY

CLEANING

Cleaning

FIG. 5A

FIG. 5

FIG. 6

DESN 514113

DESN 514184

DESN 514118 A