Specifications

WARNING: BEFORE REMOVING SERVICE ACCESS
COVERS OR THE OIL BURNER ENSURE THAT ALL
ELECTRICAL SUPPLIES TO THE APPLIANCE HAVE
BEEN ISOLATED.
The burner can be removed without disconnecting the oil
supply pipe. However if the filter is being cleaned or a
pressure gauge fitted to the pump then the oil supply
should be turned OFF and arrangements made to catch
any oil which will leak from the oil pump.
SEE FIG. 1
1. Open up the bottom burner access door.
2. Remove the 4 inner panel securing screws and
remove panel.
3. Remove the 3 plinth securing screws and remove
plinth.
5
PREPARATION
BURNER ACCESS
Oil Burner Removal
FIG. 1
DESN 514110 B