Specifications

To ensure the best performance from your Rayburn it

should be serviced once a year.

This appliance must be commissioned by a competent

engineer, such as OFTEC approved.

Failure to install and maintain appliances correctly could

lead to prosecution.

An additional flueway and combustion chamber clean

halfway through the season may be necessary in some

cases.

The Rayburn cannot be serviced whilst hot, so the

thermostat should be turned off on the evening before the

service visit.

Annual Service

BURNER REMOVAL - for cleaning and inspection.

CLEANING - Heat exchanger flueways, oven and

hotplate flueways together with ceramic fibre burner

chambers.

BURNER SERVICING.

OIL PUMP SERVICING - Cleaning of fuel line strainer.

RE-COMMISSIONING.

REPLACEMENT PARTS.

NOTE: The external extractor fan should be regarded as

a consumable part and replaced every 2 years.

Oven Door Fit - Both doors must be checked and

adjusted if necessary to ensure the alignment with the

door catch is correct, the keep is secure and the oven is

sealed when the door is closed.

IMPORTANT: FLEXIBLE OIL LINE MUST BE

RENEWED AT EACH SERVICE ON A 12 MONTHLY

BASIS.

INTRODUCTION SERVICE SCHEDULE