Specifications

ENSURE THAT ALL ELECTRICAL SUPPLIES TO THE
APPLIANCE HAVE BEEN TURNED OFF.
SEE FIG. 26
Follow instructions in section BURNER ACCESS, Steps 1
to 3.
1. Remove PCB.
2. Unscrew flue safety device.
3. Remove bracket and unclip phial.
4. Disconnect the two wires on the switch.
5. Unscrew nut holding the stat body and remove.
6. Replace in reverse order of removal.
20
FIG. 25
FIG. 26 DESN 512569
DESN 516745
Replacement of parts
(Electrical controls)
TO FIT NEW FLUE SAFETY DEVICE