Specifications

SEE FIG. 21
Follow instructions in sections BURNER ACCESS, Steps
1 to 3 and BURNER REMOVAL, Steps 1 to 5.
1. Remove solenoid plug securing nut.
2. Pull off electrical connection socket from solenoid.
3. Remove solenoid coil.
4. Fit new solenoid coil, re-assemble in reverse order.
Follow instructions in sections BURNER ACCESS, Steps
1 to 3.
1. Remove (4) screws securing transformer.
2. Remove both H.T. leads from transformer.
3. Disconnect the wires from the terminal strip.
4. Remove transformer.
5. Fit new transformer, re-assemble in reverse order.
SEE FIG. 7
Follow instructions in sections BURNER ACCESS, Steps
1 to 3, BURNER REMOVAL, Steps 1 to 5 and BURNER
NOZZLE REMOVAL, Steps 2 to 7.
1. Remove ignition electrode assembly.
2. Fit new ignition electrode assembly, in reverse order
of removal.
3. Check electrode gap and rest if necessary.
17
Replacement of parts
(Oil Burner)
IGNITION TRANSFORMER
IGNITION ELECTRODES
SOLENOID COIL