Specifications

SEE FIG. 21

Follow instructions in section BURNER ACCESS, Steps 1

to 3 and BURNER REMOVAL, Steps 1 to 5.

1. Isolate fuel supply.

2. Disconnect flexible hose.

3. Disconnect pump outlet supply tube.

4. Remove solenoid securing nut.

5. Remove solenoid.

6. Slacken (3) grub screws on pump flange.

7. Remove pump.

8. When re-fitting pump, inspect pump coupling for

signs of wear or cracking, replace if necessary and

ensure it is correctly positioned before tightening grub

screws.

9. Re-assemble in reverse order.

SEE FIG. 22

1. Remove (4) pump plate securing screws and remove

plate.

2. Remove filter.

3. Fit new filter.

4. Re-assemble in reverse order.

FAN MOTOR

FIG. 21

FIG. 22

DESN 511447

DESN 511448

PUMP ACCESS

PUMP FILTER REPLACEMENT

Replacement of parts

(Oil Burner)

SEE FIG. 21

Follow instructions in sections BURNER ACCESS, Steps

1 to 3, FAN CLEANING, Steps 1 to 4 and BURNER

REMOVAL, Steps 1 to 5.

1. Disconnect wires from terminal strip.

2. Slacken (3) grub screws securing pump to fan body.

3. Remove pump.

4. Fit new fan motor and assemble in reverse order

ensuring pump coupling is correctly located.