Specifications

1. Disconnect power to appliance.

2. The terminal cover is secured using 4 screws.

Unscrew the 4 screws and remove cover. (See Fig.

15).

1. Disconnect the power to appliance.

2. Disconnect the 3 wires to the fan.

3. Unscrew (3) M5 fixings and withdraw, fan and mount

assembly.

4. Clean fan with a soft brush.

5. Re-fit fan and mount assembly.

In order to gain access to the flue for cleaning it is

necessary to remove the flue terminal assembly.

1. Disconnect the power to the appliance.

2. Unscrew (4) M5 fixings that connect the flue pipe to

the terminal backplate.

3. Disconnect 3 wires from terminal strip (cooker supply

side).

4. Remove cable restraint clamp and free cable.

5. Unscrew (4) wall fixings and withdraw backplate

assembly.

6. Clean flue pipe as required.

7. Inspect flue terminal gasket and replace if necessary.

8. Re-assemble in reverse order.

Fan Terminal (Cleaning)

TERMINAL COVER REMOVAL

FAN REMOVAL

FLUE TERMINAL REMOVAL

FIG. 15

FIG. 16

FIG. 16A

DESN 513351

DESN 513355

DESN 513354