Specifications

SEE FIG. 10
3. Remove (3) screws securing fan motor onto burner
body.
4. Withdraw assembly from burner body.
5. Clean impeller with a soft brush.
6. Spin motor to check that it turns easily.
SEE FIG. 11
7. Remove (1) screw and slacken (2) screws from air
slider control.
8. Remove air slider and clean any fluff deposits.
9. Re-assemble in reverse order ensuring that earth
terminal is secured behind the screw onto the
terminal/transformer bracket.
1. Turn OFF the line isolating valve fitted prior to the oil
line filter.
2. Dismantle filter by unscrewing bolt at base of bowl.
3. Make arrangements to catch kerosene.
4. Wash filter thoroughly in clean kerosene.
5. Re-assemble filter in reverse order of removal.
REMEMBER
Do not kink hoses.
Do not pass hoses through side casing panels.
Always flush oil through before final connection.
Check hose for signs of discolouration, cracking or oil
seepage. Replace if necessary.
DESN 511441
DESN 511442
10
Oil Burner Servicing
OIL LINE FILTER CLEANING
FLEXIBLE OIL LINES
FIG. 10
FIG. 11