Specifications

c. Remove top cover of oil control valve, remove
metering stem and clean, then check sealing
grommet is satisfactory, Replace if worn.
After refitting metering stems, ensure it is
operating freely under the spring tension.
5. a. Open main oven door fully and remove four
screws securing inner lining panel to outer door
casting.
b. Remove inner lining panel and slagwood
insulation.
c. Unscrew two hexagon nuts securing indicator to
outer door casting, and remove indicator.
d. Fit replacement indicator in reverse order of
dismantling.
6. Check the oil rates of burner at low and high fire
rates together with smoke sampling.
11
TO REMOVE OVEN TEMPERATURE INDICATOR
LEAVE SERVICING INSTRUCTIONS WITH THE
USER FOR FUTURE USE