Technical data

THIS IS A NEW PRODUCT SO PLEASE READ THESE INSTRUCTIONS CAREFULLY, AND
IMPLEMENT THEM, DO NOT TRY AND CUT CORNERS AS THIS COULD ENDANGER THE
CONSUMER.
The Installation shall compliancy with :
BS 5410 : Part 1 Oil Installations up to 45 kW
The Building Regulations Part J England & Wales
Part F Section III Scotland
Part L Northern Ireland
Part J Republic of Ireland
BS 5449 Forced circulation hot water central heating
systems for domestic installations.
BS 7671 IEE Wiring Regulations 16th Edition.
Installation of this Equipment must be carried out by a suitably OFTEC qualified/ trained personnel, That
have also received training from Snughome in this type of conversion.
GENERAL INFORMATION
`This Snughome Conversion Kit for the Rayburn Cooker has been designed and manufactured by our
engineers who have many year’s experience in the Conversion field and incorporates many advances in
technology and design. Currently it is ideally suited to the Conversion and Refurbishment Market, where
the appliance can be easily modified as required. With the steady deterioration in the quality of Domestic
Fuel Oil and in order to increase the overall market, this Pressure Jet conversion has been developed in
conjunction with one of the top burner manufacturers.
Only use components supplied by SNUGHOME Ltd. as these have been specifically designed for
this purpose. NO LIABILITY WILL BE ACCEPTED IF OTHER THAN SNUGHOME PARTS ARE
FITTED. It has been designed to use most common fuel oils. All components are manufactured from well-
proven materials and should give reliable service with improved economy. Noise has always been a
problem with pressure jets but in this case care has been taken to reduce this to a minimum.
The sale of the Conversion is also backed up with an experienced T echnical Team that is always
willing to give help and advice. This advice is also available on a Help Line. It is the Company’s policy to
give the Customer and Installer the best Product and Service available.
At present these instructions refer to vertically flued appliances and not low level discharge flues.
Technical Data :
This appliance is an oil fired pulse pressure jet 1 stage. This should give a good performance and high
efficiency, and be more economic than previous vaporising burners.
The Fuel suitable for this burner are as follows:
1. Class C2 Kerosene (Otherwise known as 28sec Heating Fuel.)( 1-2 mm
2
/sec) 2.
Low Sulphur Diesel – ( 32 Sec Fuel).)( 2– 4.5mm
2
/sec)
3. Red Diesel - (1.5 - 5.5 mm
2
/sec)
4. Gas Oil (1.5 - 5.5 mm
2
/sec) 5.
Mazout (8 mm
2
/sec)
(A n oil Pre-heater is fitted to these burners as standard and therefore suitable for the above fuels
with only a pressure change to the burner)