User Manual

7
Specifications SR-OCFF
Diameter 6.25˝ (16 cm)
Depth 2˝ (5 cm)
Weight 8.8 oz. (249 g)
BREAKING DOWN THE SPEED RING ASSEMBLY
1. Remove the assembly
from your monolight
by pulling your
monolight’s mount
release and carefully
rotating the assembly
counterclockwise.
2. Remove the flex rods
from the softbox in pairs,
in the same manner that
Dismantle the speed ring assembly by following the mounting
instructions above in reverse order. As with the mounting process,
make sure that your monolight is turned off and unplugged from
its power source before you start.
To break down the assembly, follow these steps:
you installed them: start
with two rods on opposite
sides of the speed ring,
then the next two at a 90°
angle to the first pair, and
so on until all the rods are
removed.
3. Remove the speed ring
from the center hole of
your softbox.